Hey guys, Ive done conversions before, but only on import cars.
Has anyone here done it on the late 90's F150s?
If so, can you tell me if the drive shaft is different? (2WD only)

From my experience this is what I need for this project:

• manual tranny
• clutch pedal assembly
• clutch master cylinder
• manual trans brake pedal assembly
• (Possibly) manual drive shaft?

If anyone has undertaken this project, please let me know any problems or tweaks you ran into.
Thanks in advance,
NashT

 

What are you looking at for a transmission? donor vehicles are the best for these just to keep you safe so that you will have everything you need.