Guys,

I was changing the plugs in my 95 300 I6 and broke one of the hard plastic vacuum lines. I was able to repair it with a small flexible hose but I would like to know where to get replacements. My lines are awful brittle and I am afraid I may end up with a vacuum leak. Who has the part numbers or where can I order a whole kit?

Scott

 

They sell the stuff in bulk at Napa or AZ. No special part #'s, it's just a roll of vacuum line.

 

I am in the same boat, it seems like a vacuum line breaks every time I am under the hood they are so brittle. Replacing vacuum lines is a serious pain. You have to cut them out of looms of wires of other lines and wires and find out where the hell they all go. I have a bulk package of the rubber pieces to repair them and just fix them when they break. I carry a supply in my truck to, so I can repair any that break when I am not home.

I plan on just repairing lines when they break until I pull the motor and build it up, hopefully to a 408 Stroker, its just not worth the hassle with the motor in the truck to me when I plan on pulling and building it in a couple of years.

 

The vacuum lines I was referring to were the preformed hard plastic lines that break very easily. There are a couple right next to the #3 and #4 plug wires.