Virginina's Febuary bs/chat all welcome!
#707
#709
#711
LoL, I never get my hopes up for snow anymore. . .last I heard all we are getting is a slushy mix turning to rain
Axle is all assembled! All I have left to do (unless I decide to reset the drivers side brake rotor) is to paint the hubs and figure out how to mount a track bar when I throw it under
I tell you what, my stuff may not be Hi-Po or crammed with top end parts. . .but my **** always looks good
Axle is all assembled! All I have left to do (unless I decide to reset the drivers side brake rotor) is to paint the hubs and figure out how to mount a track bar when I throw it under
I tell you what, my stuff may not be Hi-Po or crammed with top end parts. . .but my **** always looks good
#713
#714
#715
You can get that green color mixed in an industrial alkyd oil base at duron.
#716
!!!!!!!!
I didn't know you get that stuff mixed up like that. . .cool beans Will go that route when I go through my rear axle
I don't like the ceramic stuff as far durability goes. . .even with meticulous prep work (thanks btw for the compliment) it does NOT like to take any kind of impact or stress. . .it tends to crack and tear instead of deform like the softer enamels I've been painting my truck parts with.
I didn't know you get that stuff mixed up like that. . .cool beans Will go that route when I go through my rear axle
I don't like the ceramic stuff as far durability goes. . .even with meticulous prep work (thanks btw for the compliment) it does NOT like to take any kind of impact or stress. . .it tends to crack and tear instead of deform like the softer enamels I've been painting my truck parts with.
#717
between the weather and the 2 am rescue mission we carried out last night, today was a total loss too
#719
#720
Missed the last few pages of posts and yours
Still up for bumper shimming, also I have welders if you need that crack fixed
But You have to pull the door panel off, it's a PITA
So what happened at 2am last night? I was dorking it out online. . .what else you gonna do at 2am?
Lol
Still up for bumper shimming, also I have welders if you need that crack fixed
But You have to pull the door panel off, it's a PITA
So what happened at 2am last night? I was dorking it out online. . .what else you gonna do at 2am?
Lol
well last night around 2 am, i was loading a couple fillies onto my trailer from the shoulder of i-64 near greenbrier. my friend called about 1:30 to ask if i could bring my trailer and come get them...her tagalong jack-knifed and flipped on the high-rise bridge...
Thread
Thread Starter
Forum
Replies
Last Post