my new 95 has a smitty built front bumper and the weight of it is causing the front springs to sagg quite a bit

who has installed a front add a leaf and how much did it lift the front end?

I found a set from skyjacker that say about 2" of lift. Are there any other brands I shuld be looking at ?

 

go with the skyjacker kit, thats what im running in both my f250's. you wont be dissapointed ill see if i can find a pic...

 

pics would be good

 

heres a before and after pic of the add a leafs installed. it leveled it up pretty good. any questions just ask good luck

 

I just installed the add-a-leaf about a month ago now. It made a world of difference on how the truck sits. It was a really simple install as well. I don't have any pictures but I can snap some tomorrow.

 

Anyone have numbers or measurements of the stock ride hieght by chance, I'm guessing mine is sagged, I only have 1.5 inchs between the spring stop and the rubber rebound on the front,

 

Do you have a part number for the kit you used? I find three different ones that "say" they fit.

 

This is where I got my Sky leafs and bolt.

1997 Ford F-250 Skyjacker Add A Leaf Springs, Skyjacker Truck Leaf Springs

Hard to beat the price in my opinion. Although, I had my springs a good year and a half before I instatted them.

There is no kit here, you just get 2 bolts and two leafs.

 

Farm there is no good link there.

 

1997 Ford F-250 Skyjacker Add A Leaf Springs, Skyjacker Truck Leaf SpringsNow I swear it worked when I posted it...

Click ont eh 1997 F-250. It will take you there.

 

Sorry I must have hit the word skyjacker.
What is up with these blue words they suck!

Now I am getting brackets around some of my words when I reply.

Sorry just venting.

 

its been so long ago since i did mine, but i do remember this, there were 2 part numbers available... a gas or diesel spring

i went with my adda leafs when i had about 3/4"-1" from the bumps

farm, thats a real nice price, mine put me out almost 200 from a local add-on shop