BIG truck Power Steering (F600 and larger)
#17
Just because someone says they couldn't find the parts, doesn't mean that someone doesn't have them.
It's ALL about knowing where to look.
B8TZ3A650A .. P/S Control Valve Seal Kit / Fits: 1958/60 F350/600.
DENNIS CARPENTER OBSOLETE PARTS has ONE: 704-786-8139
-------------------------------------------------------------
B8TZ3A764A .. P/S Cylinder Seal Kit / Fits: 1958/60 F350/600.
DENNIS CARPENTER has ONE.
GREEN SALES CO. in Cincinnati OH has THREE = 800-543-4959.
NORTZ & VIRKLER FORD in Lowville NY has TWO.
AITKEN FORD in Aitken MN has ONE.
BLOOMER FORD in Bloomer WI has ONE.
================================
Hmmm...It took me about 5 minutes to find the following:
31 NOS P/S Control Valve Seal Kits, and 77 NOS P/S Ram Cylinder Seal Kits for 1968/70 F850's.
It's ALL about knowing where to look.
B8TZ3A650A .. P/S Control Valve Seal Kit / Fits: 1958/60 F350/600.
DENNIS CARPENTER OBSOLETE PARTS has ONE: 704-786-8139
-------------------------------------------------------------
B8TZ3A764A .. P/S Cylinder Seal Kit / Fits: 1958/60 F350/600.
DENNIS CARPENTER has ONE.
GREEN SALES CO. in Cincinnati OH has THREE = 800-543-4959.
NORTZ & VIRKLER FORD in Lowville NY has TWO.
AITKEN FORD in Aitken MN has ONE.
BLOOMER FORD in Bloomer WI has ONE.
================================
Hmmm...It took me about 5 minutes to find the following:
31 NOS P/S Control Valve Seal Kits, and 77 NOS P/S Ram Cylinder Seal Kits for 1968/70 F850's.
A quick question. I ordered those kits from Dennis Carpenter. The seals that came in the Control Valve kit, B8TZ-3A650-A , Are a smaller diameter than the ones that came out of my control valve.
I'm going to ask John (Hotwrench) again if he's sure that the control valve came off a 59 F-600. Is it possible that someone could have put a control valve from an F-700 or larger on the F-600 my control valve came from?
#19
Bill,
A quick question. I ordered those kits from Dennis Carpenter. The seals that came in the Control Valve kit, B8TZ-3A650-A, are a smaller diameter than the ones that came out of my control valve.
I'm going to ask John (Hotwrench) again if he's sure that the control valve came off a 59 F-600. Is it possible that someone could have put a control valve from an F-700 or larger on the F-600 my control valve came from?
A quick question. I ordered those kits from Dennis Carpenter. The seals that came in the Control Valve kit, B8TZ-3A650-A, are a smaller diameter than the ones that came out of my control valve.
I'm going to ask John (Hotwrench) again if he's sure that the control valve came off a 59 F-600. Is it possible that someone could have put a control valve from an F-700 or larger on the F-600 my control valve came from?
A previous owner may have bought a rebuilt control valve from an autoparts store, but...which one did he get?
B4TZ3A650A .. P/S Control Valve Seal Kit
Fits: 1957/60 F750/950 / 1958/60 F700, F1000/1100.
DENNIS CARPENTER has TWO.
WESLEY OBSOLETE PARTS in Liberty KY has TWO: 606-787-5293
MILLER OBSOLETE PARTS in Binghamton NY has THREE: 800-543-4959.
What I would do is call one of these three, ask for the measurements of the seals.
Of the three, I'd call Miller first.
Wesley is now run by the wife of the deceased owner, and while a nice person...isn't very knowledgeable on the very parts she is selling.
Carpenter...uh...well...sometimes if you get the right person, you might get help, but that isn't always the case.
#21
Thread
Thread Starter
Forum
Replies
Last Post
IowaBlueOval
1973 - 1979 F-100 & Larger F-Series Trucks
6
06-06-2017 08:57 PM
Nick-1973-ford
1973 - 1979 F-100 & Larger F-Series Trucks
2
08-14-2016 09:10 PM
fomoco
1967 - 1972 F-100 & Larger F-Series Trucks
7
01-20-2003 12:28 PM