I putting a 4 spd on a 73 460 and using a 351M bellhousing. If anyone has done this or knows anything about this please share your info with me. I mainly need to know what my options are as to what flywheel and pressure plate to use.

 

I just parted out a truck that had a 1973 429 and a T-18 4spd. I can tell from the casting numbers that the bellhousing was from a 351M, and the flywheel was from an early 429 (1969?). A 351M flywheel has a different bolt pattern than a 460. I know that stick flywheels for the 429-460 are rare and expensive ($100 ).

Hope this helps,

Art

 

THE BELL HOUSING WILL WORK ONLY IF YOU GET A SPECIAL FLYWHEEL TRY L&L PRODUCTS OUT OF TEXAS
GOOD LUCK CHARLIE