Archived Arizona Buy/Sell/Trade Ads
#61
Coolant tank wanted
I've discovered a crack in my coolant tank and I'm looking for a new one.
Any chance someone here has one laying around they'd let go for cheap?
I just got laid off and I'm moving out of state next week to try to find work, so money is an issue, but I'll do what I have to to make it work.
Thanks
Kenneth
Any chance someone here has one laying around they'd let go for cheap?
I just got laid off and I'm moving out of state next week to try to find work, so money is an issue, but I'll do what I have to to make it work.
Thanks
Kenneth
#62
I've discovered a crack in my coolant tank and I'm looking for a new one.
Any chance someone here has one laying around they'd let go for cheap?
I just got laid off and I'm moving out of state next week to try to find work,
so money is an issue, but I'll do what I have to to make it work.
Kenneth
Any chance someone here has one laying around they'd let go for cheap?
I just got laid off and I'm moving out of state next week to try to find work,
so money is an issue, but I'll do what I have to to make it work.
Kenneth
Meet you at the 281 exit on I-10. :)
You can't email me because FTE don't like Gmail.com for some dangged reason. :(
Alvin in Vail, AZ
#63
2011 long bed protector for sale
Heya fellas, new guy here. I've got a 2011 Long Bed slide in protector I'd like to find a good home for. It came factory with the truck but I've got other plans for back there. I paid a chunk of change for it through the stealership but would let it go for a LOT less. Right now, it's sitting in my back driveway taking up space.
I paid $400 for it and will take $150. It's less than 2 months old. Wow!... no post since the original in 2007... seems like a dead thread.
I paid $400 for it and will take $150. It's less than 2 months old. Wow!... no post since the original in 2007... seems like a dead thread.
Last edited by TrainNut; 09-13-2010 at 07:25 PM. Reason: Edited post to make more sense after being moved by a moderator.
#64
Rims
OK everyone I have four 17in Ford Alloy Rims (No tires) w/the center caps for sale...$250.00 They are off my 98 expy...Should you want to purchase let me know so we can arrange for you to pick them up... Gotta start cleaning out the garage More stuff to come!
#67
Well, i will help this thread out..
Got some OBS goodies to get rid of:
94-97 Ext. Cab windows (with frames screws, polarized tint)
94-97 Standard Auto Steering wheel and column
94 OBS Gas cab wiring harness
94-97 Head lights, tail lights, Turn indicators
10x16 8-lug chrome wheels (generic)
I am very very reasonable for my Arizona People!
Got some OBS goodies to get rid of:
94-97 Ext. Cab windows (with frames screws, polarized tint)
94-97 Standard Auto Steering wheel and column
94 OBS Gas cab wiring harness
94-97 Head lights, tail lights, Turn indicators
10x16 8-lug chrome wheels (generic)
I am very very reasonable for my Arizona People!
#68
I have a couple things off of a 1964 F100 that might be useful to someone.
1. An original in-cab gas tank.
2. F-100 Hood side emblems missing the inserts.
I'll edit if I find anything else or if someone picks these up.
I'm up for trades too, I could use a C4 to 351w bellhousing, some fuel and brake line material, door panel inerts, armrests, 60's ford radio, or even a set of decent highway gears for a 9in.
email is pretty easy to reach me... sicksandtired@yahoo.com
I'm in the west Valley near I-10 and the 101.
1. An original in-cab gas tank.
2. F-100 Hood side emblems missing the inserts.
I'll edit if I find anything else or if someone picks these up.
I'm up for trades too, I could use a C4 to 351w bellhousing, some fuel and brake line material, door panel inerts, armrests, 60's ford radio, or even a set of decent highway gears for a 9in.
email is pretty easy to reach me... sicksandtired@yahoo.com
I'm in the west Valley near I-10 and the 101.
#70
Truck for sale - Morenci
1974/75 (Truck is a 75, but for some unknown reason has been declared to be a 74 by the MVD) F100 4x4 SWB........
360 rebuilt with less than 10K, NP435, working A/C.......
It was my daily driver, and I had plans to make it into an offroader, but back injuries have completely eliminated any interest that I had in recreational four wheeling. I hate seeing it sit, so I'm letting it go.
Truck is located in beautiful downtown Morenci, AZ
$2000 OBO, will consider trades for F1, earlier F100 or ???
360 rebuilt with less than 10K, NP435, working A/C.......
It was my daily driver, and I had plans to make it into an offroader, but back injuries have completely eliminated any interest that I had in recreational four wheeling. I hate seeing it sit, so I'm letting it go.
Truck is located in beautiful downtown Morenci, AZ
$2000 OBO, will consider trades for F1, earlier F100 or ???
#71
I have the original carb/spacer and intake off my '66 352. I also have a complete set of rocker shafts with adjustable rockers that need the shafts pulled apart and cleaned internally. The carb runs perfect. Just bolt on and go.
Sandblasted "Powered By Ford" OE newer FE valve covers with rounded tops.
I also have various 5.0 stuff.
Underdrive pullies
Moroso valve covers (vintage in gold)
Offenhauser Port-O-Sonic 360 degree aluminum 4 barrel intake (Vintage)
'93 5.0 roller block standard bore with polished crank, rods, pistons, new rings installed, roller lifters and new bearings. Pistons are installed and bores honed.
Have 5.0 accessories including a/c compressor and aftermarket 1 wire Powermaster alternator(140 amp), and pullies/tensioner, brackets
5.0 gasket set
Melling oil pump and drive rod new in boxes.
Make me offers if you're interested.
Thanks!
Sandblasted "Powered By Ford" OE newer FE valve covers with rounded tops.
I also have various 5.0 stuff.
Underdrive pullies
Moroso valve covers (vintage in gold)
Offenhauser Port-O-Sonic 360 degree aluminum 4 barrel intake (Vintage)
'93 5.0 roller block standard bore with polished crank, rods, pistons, new rings installed, roller lifters and new bearings. Pistons are installed and bores honed.
Have 5.0 accessories including a/c compressor and aftermarket 1 wire Powermaster alternator(140 amp), and pullies/tensioner, brackets
5.0 gasket set
Melling oil pump and drive rod new in boxes.
Make me offers if you're interested.
Thanks!
#73
Laid off and I need engine parts.... these items aren't helping. Money talks so please feel free to shoot me an offer. PM's are on but email is easiest...
sicksandtired@yahoo.com
1. 1964 F100 Gas tank with filler neck and cap, good cond. $150
2. C4 transmission, good for mock up or rebuild. w/ T-converter. $150
3. One set of 351 Windsor heads, bare castings. I can hot tank these. $100 (Crane rocker studs and push rod guides NIB $30)
4. 17" 4 spoke steering wheel. Exactly like in the Speedway catalog. $60
5. I'm also putting my Cat 250x mini bike up for grabs. I've got a lot of time into this one and asking $500.
6. Diamond trailers car hauler... 86 x 194 inches, wood deck, title in hand. $1000
I can send pics if you like and I'm located in Avondale, near Dysart and Van Buren.
sicksandtired@yahoo.com
1. 1964 F100 Gas tank with filler neck and cap, good cond. $150
2. C4 transmission, good for mock up or rebuild. w/ T-converter. $150
3. One set of 351 Windsor heads, bare castings. I can hot tank these. $100 (Crane rocker studs and push rod guides NIB $30)
4. 17" 4 spoke steering wheel. Exactly like in the Speedway catalog. $60
5. I'm also putting my Cat 250x mini bike up for grabs. I've got a lot of time into this one and asking $500.
6. Diamond trailers car hauler... 86 x 194 inches, wood deck, title in hand. $1000
I can send pics if you like and I'm located in Avondale, near Dysart and Van Buren.
#75
NEW Prodigy trailer brake controller
I have a brand new Prodigy brake controller still in the box.
Includes the Ford wiring harness.
Purchased for my new truck but my new truck has a built-in factory installed controller.
Cost $140 plus shipping
Will sell for $105 CASH
See link that shows everything in the box including the CD
LINK
PM ME
Includes the Ford wiring harness.
Purchased for my new truck but my new truck has a built-in factory installed controller.
Cost $140 plus shipping
Will sell for $105 CASH
See link that shows everything in the box including the CD
LINK
PM ME