Archived NorCal Buy/Sell/Trade Ads
#31
Wanted:57-60 F250 3/4 Ton Hubcaps for 16" Wheels
In good condition or better.A dent or two is O.K.,but please nothing too bashed up.PM me,or email is:ibuzzard@sbcglobal.net.Thanks,Steve
#32
Originally Posted by fastmover
I've got a Holley 2 bbl 500 CFM with electronic choke on it. It has less than 3000 miles on it and is less than 9 months out of the box. I am pretty open to negotiate for it. Trade and/or money works. I am looking for a bench seat from a '67-'96 ford that is in good shape.
Thanks,
Karl
Thanks,
Karl
Sold this item...
#33
I need a cheap/free 351M/400 very close to Sac. Mine took a dump, I need to repower my crewcab so I can use it. I have a 460, but am not really interested in trying to remember the recipe or tracking down parts to fit it.
#34
Many ford truck parts for sale.
I'm located in Manteca, CA. Just cleaning out the garage here's what I got.
92-96 F-series rear bumper grey paintable good conditon needs brackets $50 firm.
1988 ford mustang 2.3l block. I bought the motor from someone just needed the head. Selling the rest for $20. Just want it gone. Perfect for rebuild.
https://post.craigslist.org/imagepre...590033fe .jpg
awesome cut out doors for a ranger 83-88 or bronco II. Would make a great 4x4 project. They are riveted and have a working inner handle. Look great. You couldn't get a better set made for this price. Just need to paint to match. Also have a hole for 6x9's. I'm selling my ranger don't need them anymore. I'm firm on the price $150.
I have 3 mickey thompson rims. They are classic lock 2's. They are polished and are in good shape just could use a little polish. The came off a ford explorer 1992 and will fit rangers and bronco II 2 . I also have a similar rims that I will sell for $25. It looks simliar but isn't the same rim to make a set of four. New these rims run about $80. Will work great on a 4x4 project. I will not deliver and will not meet half way. Firm on the price of $125 for the three or $150 for the four.
I have a set of four 16x8 eagle alloys. They are 8 lug by 6.5" will fit pre-97 fords, and all chevys, dodges. They are a year old in good condition and just could use a polish. I paid $500 for them last year. I don't have the center caps. I will not deliver or meet half way. I'm asking $250 and firm on the price.
Thanks for looking.
92-96 F-series rear bumper grey paintable good conditon needs brackets $50 firm.
1988 ford mustang 2.3l block. I bought the motor from someone just needed the head. Selling the rest for $20. Just want it gone. Perfect for rebuild.
https://post.craigslist.org/imagepre...590033fe .jpg
awesome cut out doors for a ranger 83-88 or bronco II. Would make a great 4x4 project. They are riveted and have a working inner handle. Look great. You couldn't get a better set made for this price. Just need to paint to match. Also have a hole for 6x9's. I'm selling my ranger don't need them anymore. I'm firm on the price $150.
I have 3 mickey thompson rims. They are classic lock 2's. They are polished and are in good shape just could use a little polish. The came off a ford explorer 1992 and will fit rangers and bronco II 2 . I also have a similar rims that I will sell for $25. It looks simliar but isn't the same rim to make a set of four. New these rims run about $80. Will work great on a 4x4 project. I will not deliver and will not meet half way. Firm on the price of $125 for the three or $150 for the four.
I have a set of four 16x8 eagle alloys. They are 8 lug by 6.5" will fit pre-97 fords, and all chevys, dodges. They are a year old in good condition and just could use a polish. I paid $500 for them last year. I don't have the center caps. I will not deliver or meet half way. I'm asking $250 and firm on the price.
Thanks for looking.
#36
Update
Originally Posted by fastmover
UPDATE- I am now looking for the inner passenger side fender. Thanks to Dan, I got all the rest.
Karl
Karl
#37
Must sell by Saturday (truck is located in Napa, CA):
Truck details (it has most of the cool features I look for in a bump-side):
1968 F-250
Lunar green/white two-tone
Camper Special
Custom cab
360 V8 with 4bbl carb
Factory AC
Factory disc brakes (rebuilt)
Power brakes
Dual gas tanks
Bed-side toolbox
3:73 rear end
7500 GVWR
Clean title (but no/op) - no fees due
It has dented passenger side door and rusted thru passenger footwell (previous bozo owner(s) allowed the rear window slider to leak water which collected under the rubber mat).
Pictures can be viewed here:
--See site terms--
Look for the lunar green/white truck. I rescued the truck from the wreckers and paid $500 for it, so a price in that area would be great.
Note: The other truck (1972 F-250 blue/white) is one I'm restoring now (bought it first).
I have no room for the other truck. :-(
I also obtained the factory build sheet from Ford.
Thank you very much. We can't let this go to the crusher!
Will
Truck details (it has most of the cool features I look for in a bump-side):
1968 F-250
Lunar green/white two-tone
Camper Special
Custom cab
360 V8 with 4bbl carb
Factory AC
Factory disc brakes (rebuilt)
Power brakes
Dual gas tanks
Bed-side toolbox
3:73 rear end
7500 GVWR
Clean title (but no/op) - no fees due
It has dented passenger side door and rusted thru passenger footwell (previous bozo owner(s) allowed the rear window slider to leak water which collected under the rubber mat).
Pictures can be viewed here:
--See site terms--
Look for the lunar green/white truck. I rescued the truck from the wreckers and paid $500 for it, so a price in that area would be great.
Note: The other truck (1972 F-250 blue/white) is one I'm restoring now (bought it first).
I have no room for the other truck. :-(
I also obtained the factory build sheet from Ford.
Thank you very much. We can't let this go to the crusher!
Will
#38
My fiend is selling her 1976 ford 250 two wheel drive Long bed. It is a granny box stick. with a New clutch. The motor is a 390. Needs a decent amount of work, but runs and drives. It runs better then it drives but is road worthy. Shes asking $1000 for it and is open to almost anything in trade.... PM me and let me know what ya got.
#39
selling my 1990 f150 single cab. 4.9L I6 5spd manual. 4x4. truck is in great condition. interior is is great shape. im selling it as is. i have kept up the regular maint on this truck as long as i have owned it. as of right now the transmission is shot. 1st and 2nd gear are completley gone. i am also having problems with the starting system, something electrical. I havent had the time to fix these problems due to money and limited free time. I am an active duty Marine stationed in Camp Pendleton, Ca and dont make it home very often, the truck is right now being stored at my moms house in san jose, ca..would be a great work truck or 4x4 project for any one willing to put the time into it. I wish i could keep it. im askin $1100 obo. please email for questions and pictures.
rebelcowboy6707@hotmail.com
rebelcowboy6707@hotmail.com
#40
I've got a 1966 F250 custom cab trimmed bed. Trim in pretty good shape for 43 years. No tailgate. No Dents. Surface Rust Only. Locking Doors for Saddle Tanks. Barden style bumber included. 2 - 15~ gal Saddle Tanks Included.
$350.00 or best.
$350.00 or best.
#42
my truck have no room or time monster truck 85 f350 4x4 3000obo
#44
I have a Bed off a 78 Ford 250 4x. No trim but has excellent tailgate. Orange in color. Dual Tanks, No Rust whatsoever. Small dent behind drivers side tire on the bottom of the bedside. Make me an offer. Can email me at powerstroker99dually yahoo. I'm located in Yuba City. 45 mins north of Sacramento. Thanks guys.
#45
Updated list:
5.8 & 5.0 efi upper/lower manifolds
2 stock throttle bodies
2 sets of used 19lb/hr injectors (orange top)
2 sets of used 24lb/hr injectors (light blue top)
K&N 6" I.D. conical filter/ heat shielding w weatherstrip/ and filter to MAF adapter, everything but the intake tube from the almost $300 kit on the page below:
http://store.knfilters.com/search/pr...x?Prod=57-2543
Slightly tweaked rear bumper off 92 bronco, bent hood off same.
Set of alloy factory wheels (with the rivet heads)
And a box o' mustang parts on CL.
5.8 & 5.0 efi upper/lower manifolds
2 stock throttle bodies
2 sets of used 19lb/hr injectors (orange top)
2 sets of used 24lb/hr injectors (light blue top)
K&N 6" I.D. conical filter/ heat shielding w weatherstrip/ and filter to MAF adapter, everything but the intake tube from the almost $300 kit on the page below:
http://store.knfilters.com/search/pr...x?Prod=57-2543
Slightly tweaked rear bumper off 92 bronco, bent hood off same.
Set of alloy factory wheels (with the rivet heads)
And a box o' mustang parts on CL.