Steve, I have asked you a couple of times to join our group as you certainly are welcome - however . . .

The rules we work under clearly state that you must be a member of our group, or a similar FTE group, to post for sale or wanted items.

Clint

 

Hi I'm in Marysville. Tires have about 60% left on them.
The rims are in great shape.
These are the upgraded alloy stock rims sold on the truck new.
Thew stealership sells the rims for $260.00 a piece.
Call Ron @ (530)701) 8898

 

Hi guys and gals, I'm cleaning out the old garage. So you might that say I am having a garage sale.

One good chrome rear bumper for a 68 Ford truck with license plate light and two braces. Price: $1

Y-Block 2-barrel manifold with truck style carb all cleaned up with the manifold painted!! Price $1

Pair of valve covers from a 1967 289 all cleaned up and painted. Price $1

One used Motorcraft starter for a 1967 289. Price $1

Three ribs for the 54 truck headliner. Price $1

I will consider all offers, Jag

 

I got a 300 head from a 78 E100, complete with the head bolts & valve cover($50) I took it off and was going to port it, but decided not to.

Also have a couple intake/exhaust manifolds from the same 300, and from my 67(used to be a 240). The 67 has some throttle linkage with it too. Both come with carbs if desired($25 for either one).

 

Anyone looking for 5.4 engine parts? My project truck has a bad 5.4, it spun a rod brg. Has lots of good stuff still on it. Also a recently rebuilt 4R100, the full exhaust system, radiator, and some other stuff. The stuff still belongs to the previous owner, and I'm just helpin him get it out. It has 191k miles.

 

I have a paintable rear bumper for 92-96 f-series and a center console without the hardware or the cup inserts. Take a look.

http://stockton.craigslist.org/pts/317207018.html

 

I've got 4 OEM alloy rims 16" from an '04 Superduty Lariat. Excellent condition. Center caps (2) included. The rims have mud terrain tires still mounted on them. The tires don't have a lot of useable tread left 5-10K miles, maybe. $150 or offer.

gw

 

Stuff going to the scrap yard:
1- 1960 352ci intake manifold
1- set of 1960 352ci heads
2- 460 intake manifolds. One of them is a C8, with the big primary holes. The other is a D3.
1- 1960 352ci oil pan

All FREE. If interested, don't waste any time letting me know. I'm hauling it all off soon. Real soon, unless someone lets me know they want any of it. Then I would hang on to whatever you might need.
PM or e-mail me.
Tim

 

I'm looking for a cheap winch to put on the winch bumper that I'm refinishing for my 95 F150 right now. I'm really not looking to spend very much. It will probably need to be around a 12-15000 lb winch. Let me know if you have something.

Heres the thread with my bumper that I'm working on restoring:

https://www.ford-trucks.com/forums/6...put-there.html

I'd be out there workin' on it right now, but its too damned HOT! Thanks guys.

-Chris

 

Hi,
Does anyone have any of the following body parts for a bumpside pickup (67-72) that are in decent (not rusted out like mine) shape to sell me?
Left and Right inner fenders
Radiator support
Passenger headlight bezel
Grille

I will drive to pick them up.

Thanks,
Karl

 

Looking for 1957-64 F100 front axle I beam. Don't need hubs and brakes, but let me know what you have.

Have you upgraded your front end and have the old one laying out back?

I'm located North of S.F. in bay area. Shipping is what sometimes cost the most on these items... of course UPS or Grayhound works for me also if too far away.

Found a complete truck locally for $500.- but don't need another project...found another full front end back East on eBay for under $50., but shipping was over $300. Yikes. The full truck started to look better. Nah.

Drop me an Email (reply). - Thanks

 

Hey Folks, I'm moving back to the Santa Cruz area next week, so I figured I'd throw this up in advance...

I'm looking for a body (even just a cab) from a pre-smog dentside pickup with a clear vin (non-opped or just not too much back reg owed).
I have a 79 F250 that has about a year left until I have to smog it again, and I'd rather not have to go through all the Cali emissions nonsense, so I'm looking to change the cab to a pre smog so I can register it as the donor truck (and then build up the motor ).

If any of you folks have an old one sitting around or know some folks that have one, please PM me. Thanks!

 

From '59 F250.Would prefer to trade,otherwise make me an offer-I need a 1500 watt continuous duty inverter,a 6'-8' long roll-up awning to attach to my camper shell,a really nice piece of at least 4" thick foam for a bed (twin size).Whadda ya got?Thanks,Steve.

 

UPDATE- I am now looking for the inner passenger side fender. Thanks to Dan, I got all the rest.

Karl

 

Nephew wants it gone, front rubber (where it would go against the rear window on you truck) needs replacing, the rest looks okay. He'll take 150 for it, and I'll steam it off for you.

It's for a short-wide box, was on his '79 Chevy 1/2 ton, but should fit any short wide box (full size) pickup.

PS-it's white.