I am looking for a hood from a 67-72 ford pickup.

 

Good friend is trying to sell his '78 f-150,2wd,longbed,302-2bbl, 3spd w/G.Low.
This truck is running great. He's the 2nd owner and the truck has under 70,000 original miles, yes that's right, original miles. Needs paint and light interior work. The body has very little rust and no major damage. It'd be great for a resto project but he's wanting a 4x4 of the same year. He's asking $1500. PM me or email me at ag30265@gmail.com

 

I'm looking for a short bed with little rust for a '79 f-150.

 

i have an 88 full size 6 in lift needs matching tires and rims, and fuel pump in tank. new water pump,cam lifters, dist., batery, and a few other peices. minor damage on driver side not bad, and could use a new tailgate. 1250 obo email for pics.

 

selling a `set of 99 f350 axles disc brakes, front has new ball joints,new seals,new warn locking hubs, and many other peices.

 

email for pics needs tailgate if desired, needs matching rims and tires and an intank fuel pump.
many new parts

 

i would like 1000 watch is yer offer

 

I am looking for a 73 - 79 crew cab 2 wheel drive. If you see one anywhere any condition please let me know. Thanks

 

1988 FS bronco needs work but runs good. Need to sell to make room for new project. IM me for all the details. In coweta county can possibly deliver depending on where. Asking $1000.00 OBO.

 

I'm looking for a early carbed 300 I6 preferably complete and running. Doesn't need to run very well,however, since I'll rebuild it before swapping into my new (to me!) '58 F250.

Thanks

 

I have a 2wd Mazda 5 speed and the 2wd twin i-beams out of my '92 F150 for sale. Best offer takes them! (or trade for running 300, see above)

 

I would like to sell my 78 f-100. It has a 460 with way to much money dumped in it. 305 dur .580 lift Comp Cams cam. Crane roller rockers,New Tunnel Ram with 2 600 cfm Holleys, headers with new exhaust and series 40 Flowmasters. C-6 tranny with 3000 stall, New 31 spline Detroit Locker with 4.56:1 gears. Way to much stuff to list here. The truck will run mid 8s in the 1/8 mile. Needs body work, paint and upholstery to finish. Would also make a great doner vehicle to put the drive train in something else. I have over $10,000.00 invested, asking $5500.00 would consider possible trade all or part. PM me I would be glad to call and talk with someone if interested. You can see pics in my gallery.

 

I'm lookin for Bucket seats for my 94 f150 regular cab. (i have a bench seat now, but i prefer bucket seats) anyone know where to buy some, or have some for sale? also looking for a chime module.

 

2003 F-250 XLT 4x4

7.3L Diesel (This truck was manufactured the last month they made the 7.3L)

Automatic, 115,000 miles, power windows, locks, mirrors, cruise control, am/fm/cd/cassette, cloth interior.

At 88,000 miles had brand new front end components replaced. MOOG ball joints,tie rod, tie rod ends,drag link, high performance brake rotors, severe duty brake pads front& back. Just prior to rollin 100K Warner Robbins Ford thoroughly checked it out. Had it completely serviced, tranny,rears,oil.

SuperTuner ($400)

Stainless Steel Grille Guard

Ford Factory Step Up Bars

Rhino Lining Less Than 2 Months Old (Have Receipt)

Had front end aligned, wheels and tires balanced and rotated, oil changed, oil filter replaced and fuel filter replaced on April 28th (Have receipt).

Have 2 different sets of gray floor mats (Huskyliner)

Has 35x12.50x17 BFG Mud-Terrains on Mickey Thompson Classic 2 Wheels.

2-Inch Professional Lift

5th wheel/Gooseneck Hitch

Towing Package

Had truck detailed 2 months ago ($265 have receipt)

AWESOME LOOKING TRUCK!

$21,000 OBO

 

I gotta 1990 Dodge Colt, Kid is not responsible and need to sell. New head gasket, tires, brakes, clutch slave, battery, starter. By new I mean less than 300 miles on all!