What type of shifter are you offering?

 

Its a B&M Z-Gate. It is in very good condition. I bought it new and put it in the truck. The opening bid is $25.00.

 

I have a cmplete exhaust system for a short bed with a 429/460. That includes headers and 2.5" pipes with a crossover and series 40 flowmasters. The pipes turn down just in front of the rear end. These have an awsome sound to them. $200.00 or trade for shop equipment of equal value. Ex. tall drill press or 14" bandsaw.

 

I've got a set of Teleflex Genesis guages that I just changed in my '60 (got a free set on AutoMeter)
Fuel level 2 1/8"
Volt 2 1/8
Temp 2 1/8
Mechanical spedo 3 3/8
If anyone can use them $50 for the set

 

3.0 SHO, 302, 351w, 352, 292, 390, 429. Also have trans. for a few. We have multiple 302. Email for prices & specifics. Thanks for looking.
mustangwerks@hughes.net

 

my bud needs a york compressor and bracket to fit a 351m or 400.... any help would be really appreciated..

 

Need a hood and drivers door for a 91 F-250, in the NW GA area. Also interested in a set of wheels 8 lug 16" either white wagon wheels or aluminum must fit 4WD.

 

Mods please leave it for a while; I will like to sell it locally.

Ok guys here is my wife's truck for sale. She got a new BMW so she does not have any use for this truck, We bought this truck about a year 1/2 ago for her and did more than $3000 in upgrades, but we will get to that later. The truck is in good condition the interior still smells like new, we are the 2nd owners of the truck. this is the 2WD 4.6L Triton V8; good for everyday conmuter or for heavy duty jobs. The engine is as smooth as a new, and the transmission always shifts sharp and on time. Mechanically, the trucks is at is 100%, We paid $500 to get a JimmiJammer 4door lock system installed so the truck is not a target for thiefs. We have always change the oil on time. The truck comes with CD player, power mirrors-windows-pedals-locks, 2 remotes for keyless entry with manufacturer alarm, All windows were tinted, electric brakes unit for towing, Projector headlights with HID driving lights for superior night time vision, new tail lights & cornerlights, bug shield for a clean windshield & side door steps. We replaced in the pass 3 months the alternator, new front brakes and fuel injectors for better fuel economy. The truck comes with a ITG race air filter + a cold air intake. The exhaust system was completely redone with shorty headers for better flow and new mufflers & resonators coming out from the side like the supercharge F150 lightning, this gave a light muscle sound to the truck but *very light*. Truck has 130k miles and you need to test drive it to see how strong it is. please call for any more info (678)925-5071. Asking price $9,900

Pics here
















Thanks

 

* LOWER PRICE NOW *

 

anybody have a good 5.0L EFI laying around? runs and reasonably priced, prefer in NW GA area or maybe even a donor truck reasonably priced

 

I recently (Dec 07) purchased this older 92 ranger and it ran good, until the 2 front support bearingsfor the tranny shafts took a dive. I replaced the bearings and saw a little wear on the gears but I did not have time or cash to replace them all. I have driven it for about a month and suddenly on the way home from work it ground up and died, only 4th gear worked (4th geared it for 10 miles).

Anyway I need a used M5OD-R1 tranny quick and hopefully cheaper than the local tranny shops and junk yards. E- mail me with costs and where you are. I am in NE Ga about 20 minutes from Athens.

Thanks guys,

PhillipL

 

I need a 86 4x2 AOD transmission.

 

selling a 68 f100 4 -2.000.00 ,see classified add-or my profile .@.mikey92665

 

just added pics. of motor&int. in my profile if your interested

 

Hey guys, I'm hintin some front end parts for my 67 Ranger. It has now been hit on the drivers front corner by two different deer.

So my list includes:

67-9 aluminum grille(see pic) however I'm not picky if somebody has a 68-9 grille.
Drivers headlight door.
Front chrome bumper, dosen't need to be perfect.
Drivers fender, as straight and solid as possible...
I also need a drivers narrow bump molding and the little 6" front piece.
A straight rad core support would make life wonderful, but I'm not sure that will happen.

Please let me know if you have any of the pieces and can ship, or live or pass through N. GA occasionally.





Thanks, Gabe