ALLLLLRIGHT! I finally got a new crank and rods for my 460.. But, all my books are in storage!!
Can someone tell me, or give me an idea, of what the Torque Specifications on the :

Head Bolts

Main Cap Bolts

Rod Cap nuts

are?
LOL I feel helpless without my books, but they are all locked up right now, and I want this thing together TOMORROW!
Thx, guys.

J/.c

1965 Ford Galaxie 500 (okay, so not quite a truck)
460/C6 transplant @ 389hp/491 lb.ft.
14.29@103.8, 13-14 mpg heheheheheh

 

This is for the 74 and up 460's, cyl. heads should be 130-140 ft.lbs., rod bolts should be 40-45 ft.lbs., the mains should be 95-105 ft.lbs., intake (stock) should be 25-30 ft.lbs., and the exhaust (stock) should be 26-33 ft.lbs., crank pulley at 70-90 and flywheel to crank at 75-85. Hope this helps!

 

WOnderful! I had an idea they were close to that, but I didnt want to take a chance on a hunch...
thx very much!!

J/.c

1965 Ford Galaxie 500 (okay, so not quite a truck)
460/C6 transplant @ 389hp/491 lb.ft.
14.29@103.8, 13-14 mpg heheheheheh