When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stripped them with aircraft paint remover, then started with with buffer and medium cut. Then I went to mothers polish, but its still not there. So I ordered an Airway buffing wheel and white lightning rouge to get them polished out.
I should note that they do appear more polished then the picture shows. I was happy for the minimal effort it took.
I used this meguiars thing I found at my local Farm and Fleet. Using it on a drill was boring, so I put it on a right angle adjustable power die grinder. I used a red compounding pad with the medium cut and a foam yellow pad for polishing.
I used this meguiars thing I found at my local Farm and Fleet. Using it on a drill was boring, so I put it on a right angle adjustable power die grinder. I used a red compounding pad with the medium cut and a foam yellow pad for polishing.
1993 the very first truck Boss plow put their V plow on in front of the bumper instead of behind. I had to let Boss show the truck for 3 months at conventions. I got a discount on the plow. I had to get helper springs on the front to hold it though. Stupid IFS. Lol
Nah, I just took it to work yesterday so I could work on it. We have a nice shop there, and my boss is nice enough to let us use it any time we need to (off the clock, of course).