Replacing/Modifying AOD Tailshaft Governor
#1
Replacing/Modifying AOD Tailshaft Governor
Tranny in question came from a van with 3.55 or 3.73 (90 E250 that I never saw, so not quite sure) but I am running with a vehicle that currently uses 4.10 gearing in the diffs.
I have been told to 'add weights' to the governor. Is this something I can do myself? Ford parts still available? Should i just try to find a 4.10 governor??
Then I am curious if I should re-visit TV Cable adjustment when governor is changed/modified.
Any insight is appreciated
I have been told to 'add weights' to the governor. Is this something I can do myself? Ford parts still available? Should i just try to find a 4.10 governor??
Then I am curious if I should re-visit TV Cable adjustment when governor is changed/modified.
Any insight is appreciated
#2
I'm running an AOD and have never heard of changing anything associated with the governor when changing gears. Go to www.TransGo.com or www.baumannengineering.com and see what they have to say about the AOD. I am putting a TransGo shift kit in mine right now to help it shift better and live longer.
Thread
Thread Starter
Forum
Replies
Last Post
Macrobb
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
48
03-05-2016 11:55 PM
Macrobb
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
24
01-02-2016 01:54 PM
scrobbie
1987 - 1996 F150 & Larger F-Series Trucks
4
01-18-2014 06:12 PM
DanCampbell
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
9
09-29-2010 08:19 AM