You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
So, I'm done with college here at Indian Hills in Centerville. Finally done with my AA (ok ok, it didn't take particularly long, just nice to be done with it). Finally get to leave Centerville. Actually, amazingly for the first time in over 6 years, I'll be moving back to Pleasantville and calling my childhood home, home, again (Mom got sick with cancer about that time). I get to commute to Oskaloosa until either the fall when I move into the dorms at William Penn U, or I decide to move into someplace in Osky. I'm transferring my job from Fareway in Cville to the one in Oskaloosa.
So..good news is I'll be pretty damn local to the mud drags now, Rob. Also be like 15-20 minutes closer to you, maybe I'll get those axles done someday lol. I won't do anything about the SAS until I'm closing in on not having to commute all the time. Don't need to lose too much mileage with a 45 minute commute on my hands, you know?
Hopefully we can also get a Central-to-Eastern Iowa meet put together again. I just felt like telling somebody I was done with my AA. I went to Kansas last week, and stupid me I'm thinking about even transferring to University of Kansas after the first term at Willie-P. Ah well.
Congrats on finishing, my wife just finished her LPN year, on to RN, then off to Marengo we go, where she will finish at the U of I, and I may be chasing after an engineering degree..
I was just in Osky a few weeks ago, had lunch there and moved on...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Where'd you eat at? I miss Osky, I'm looking forward to returning. I really should find a place to live in Oskaloosa to save myself commuting costs for the summer. Plus...I'm kinda done with dorms. I was RA this last year, and its just a drag. Nice to have all the guys around though. We'll see.
Rob, I'll be local to all the rest pretty much. Be living in Pleasantville...what is that like less then a half-hour up the road? Sorry about the first one though, I had planned on it. My camera is screwed up, too.
I stopped at the family restaurant over on the east side, forgot the name now, but not a bad place at all. It'd been a loong time since I was in Osky...over 10 years...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
I'm SO excited. I just logged in to my school account to check worriedly what my final GPA was, basically what I got for the final term. Coming out of Winter term I had exactly a 3.5GPA, and I have to have a 3.5 GPA to get my scholarships from William Penn when I go there. Well, I knew I had 1 A, and 1B so far, with 2 more classes waiting to see. One was a 1credit class required for graduation, so it wasn't really important, but the other one was the swinger. It was also the class that you had to have a 94 or better to get an A. Well, I ended up getting a 3.7! Awesome! I'm so excited, one of those "weights" being lifted off my shoulders ya know? Well, I'm gonna stop typing like a spaz now. Later!
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
