R1 Concepts Drilled and Slotted Rotors
#1
#2
I've owned PowerSlot on my 1996 Mustang GT. I am very very happy with the quality of the rotors. These were slotted only through. I had a problem with the drilled rotors developing very fine heat stress cracks around the holes. After doing some internet research, I found its very very common for drilled rotors to develop these fine cracks....not good!! slotted rotors give all the benefits of drilled but are much stronger. I must admit the drilled rotors look nice. But function above fashion on rotors is a good idea.
So far so good on my stock 04 F-150 rotors, but if I do end up replacing the stockers, I'll definetly not hesitate to buy Powerslot again....
So far so good on my stock 04 F-150 rotors, but if I do end up replacing the stockers, I'll definetly not hesitate to buy Powerslot again....
#3
Originally Posted by Blackscrew60
Anyone purchase any cross drilled and slotted rotors from R1 Concepts? If so hows the quality of the rotors? Are you a satisfied customer? Looking for some feedback on R1 Concepts rotors.
<!-- / message -->
<!-- / message -->
Thread
Thread Starter
Forum
Replies
Last Post
Travis O'Connor
Excursion - King of SUVs
19
09-21-2015 03:12 PM