C6 Rebuild
#1
#2
I have a C-6 behind my 360 and when it was rebuilt the guy used a heavy duty Trans-Go kit and that tranny has taken a beating from me.. granted it is stock power.. but I have hauled car trailers (yes I know its only a 1/2ton). I have burnt many tires off the rimes (yes I know immature) and it was rebuilt in 1992! He charged me $600
The same guy built the C-6 4wd for my 1984 Bronco which has a 460 pushing approx 420 hp and 500 ft-lb's of TQ. I don't roast tires with this truck (though I could, them 32" BFG's cost too much) but I do tow a 2 or 4 place snowmobile trailer during the winter. He used the same heavy duty Trans-go kit, I have a TCI Truckmaster torque converter in their as well as the AOD 1st and 2nd gear planetaries. That rebuild was done in 2002 and cost me $900, but that included the cost of the AOD planetaries.
So I am saying I enjoy both of my C-6's with the Trans-go kits
The 360 has the same bolt pattern as the 390. All FE Engines(352,360,361,390,391,406,410,428)
The same guy built the C-6 4wd for my 1984 Bronco which has a 460 pushing approx 420 hp and 500 ft-lb's of TQ. I don't roast tires with this truck (though I could, them 32" BFG's cost too much) but I do tow a 2 or 4 place snowmobile trailer during the winter. He used the same heavy duty Trans-go kit, I have a TCI Truckmaster torque converter in their as well as the AOD 1st and 2nd gear planetaries. That rebuild was done in 2002 and cost me $900, but that included the cost of the AOD planetaries.
So I am saying I enjoy both of my C-6's with the Trans-go kits
The 360 has the same bolt pattern as the 390. All FE Engines(352,360,361,390,391,406,410,428)
#3