Anyone have a BBK Throttle Body on your EFI 460?
#1
Anyone have a BBK Throttle Body on your EFI 460?
I'm thinking the next step for my '94 F250 will be the BBK throttle body (twin 61mm.) I already have Banks headers, intake and cat-back exhaust. I've read some of the other threads on throttle bodies, but haven't seen anything specific to the 460. Anyone here have seat of the pants experience with the bigger TB? I don't expect too much, but every little bit adds up. . .
Thanks!
Thanks!
#2
#4
#5
Thanks guys - I definitely will go with the adjustable fuel pressure regulator first. We'll have to swap optimum pressure stories! I'm thinking the throttle body might be worth it (5-10hp) if I can find a chipmaker that could give me somthing that would take advantage of it (bigger TB.) Superchips came up empty for this truck and I'm not getting any responses from Diablo thus far. I'll have to get on the computer chip forum and see what turns up there. . . .
#7
Join Date: Jan 1997
Location: Enjoying the real world.
Posts: 23,165
Likes: 0
Received 7 Likes
on
6 Posts
Trending Topics
#9
Since it was posted 21 years ago I'll say I used a BBK fuel pressure regulator and I started having a weird Idle so I checked my fuel pressure and discovered the vacuum port was leaking where it goes into the regulator. It was only a year old so I felt like it was a waste of money.
Thread
Thread Starter
Forum
Replies
Last Post
Domenico
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
11
08-12-2005 01:01 AM
kevinrf250
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
02-07-2004 12:56 PM