I'm looking for answers that i can't find. Hoping this forum can help. I'm getting a 4" BDS lift installed, bushwacker pocket style fender flares and i want to run 37" tires. Hoping to get tires around 1/2" to 1" out past flare. What kind of trimming is required for this setup? Does anybody have this kind of setup and wish to share some info or pictures?

 

The shop that I'm talking to has installed a number of BDS 4" Radius Arm lifts running 37" x 13.50" tires on aftermarket wheels. With the right backspacing they assure me there's no rubbing. (Don't have the b/s info with me)

 

Would like to see pics too

 

I'm getting a 4" BDS, 37x13.5x22 -24OS, Toyo MT's, Bushwacker pocket flares installed Monday. I think my wheel offset will cause me to do some trimming. Will see soon enough.

 

Make sure to get some pictures up. I was thinking about going with 20x10 rim with -18 offset and 37" 12.5" tires. I'm sure it will probably rub and need trimming also.

 

Any more info from that shop your talking to?

 

I'm looking to do the same setup with the exception on maybe the flares. I defininetely want a wider than stock stance. Looking to do 20x12 wheels on 37's.

 

Yes!

Here's what I was told by a local shop that's put the 4" BDS Radius Arm suspension lift on 2017 Super Duty trucks (no rubbing):

Wheel Offset:
20x10 wheels -24
20x9 wheels -12

https://www.tirerack.com/wheels/tech...jsp?techid=101

 

How did the lift turn out? Got any pictures to show?

 

 

Looks great. What specs you got there? Any rubbing or trimming?

 

Troll alumiduty on instagram. They have loads of pictures of all sorts of crazy configurations and post the details like lift tires etc.

Wonder if some one could convince them to do a thread on here...

 

 

Hey man that truck looks amazing, What is the specs of the lift and the fender flares? I have never been a fan of the flares but after seeing a few, they are certainly starting to grow on me!
Thanks

 

BDS 4" lift
Bushwacker flares