I picked up this bucket seat center console for $10 at a yard sale earlier this summer
and took an afternoon last weekend to adapt it to my truck. It worked out pretty well.
A nice snug, tight fit. ...looks like it would also accommodate a floor shifter.
Thought I'd share it.

Called Clutter Catcher, they retail new for about $60 or less, depending where you look.

Truck consoles or Clutter Catcher Minivan and Truck Floor Console - TXS542SERIES or ...

 

Pretty sweet. Looks like it doesn't allow much room to slide the seat, do you have it bolted down?

 

I found there was no need to bolt it down. The flat surface at the end of the console, lining up against the flat surface of the firewall, (as well as the width of it in general) doesn't allow for any movement. The top of it is snug up against the bottom of the dash. The seat being cushioned, can still be moved forward a few inches. With the seat not touching the console at all, it still sits solidly on the floor, with no movement.
...It was worth a try and I just got lucky I guess.