You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I think it would be very cool to have our own logo. Maybe anyone that may have some ideas for a design could create it and a link to it in this topic and we could vote on it. Soon as I reload my graphics programs back on my computer I'll see what I could come up with. If we all put our ideas together we should be able to come up with something awsome.
__________________
1979 F150 4x4
38.5" GroundHawgs
NP205 Tcase
C6 trans
Custome front and rear bumpers
9" of lift
351M soon to be built 460
Actually, when we started the Indiana chapter I designed a logo. I didn't get it the way I wanted it so I never said anything. This is what I came up with. What do you think? I want to add a drawing of a Ford truck. I don't have a decent drawing. That is what I feel is missing from it.
Not to bad Indiana Trucker, would you mind if i have time this weekend (in the middle of putting new siding on my house at the moment) if I try adding a bit to it? Does it have to be a drawing or could it be a photo with what you have overlayed on it? Or possibly Club FTE above ,picture or drawing in the center, and Indiana chapter with the state pic below?
__________________
1979 F150 4x4
38.5" GroundHawgs
NP205 Tcase
C6 trans
Custome front and rear bumpers
9" of lift
351M soon to be built 460
Originally posted by FordMayhem Not to bad Indiana Trucker, would you mind if i have time this weekend (in the middle of putting new siding on my house at the moment) if I try adding a bit to it? Does it have to be a drawing or could it be a photo with what you have overlayed on it? Or possibly Club FTE above ,picture or drawing in the center, and Indiana chapter with the state pic below?
Mayhem,
I am up to any suggestions. It doesn't have to be a drawing. I had just pictured (example) a 1956 F series on one side and an newer style truck on the other. That way it covers both sides of the fence.
Go ahead and play with it if you want. This was kinda a first draft. I got so many graphics under construction this one kinda got lost in the shuffle. If somebody can improve it I am all for it
Indiana Trucker: Was that you that I shouted at on the cb last week on us31 so. outside of carmel? I thought you came back on radio but there was too much air traffic at that time of morning to carry on a conversation, I was going north and lost the connection quick.
Originally posted by Streetcruzer Indiana Trucker: Was that you that I shouted at on the cb last week on us31 so. outside of carmel? I thought you came back on radio but there was too much air traffic at that time of morning to carry on a conversation, I was going north and lost the connection quick.
Just wondering,
Lenny
Lenny, No wasn't me. I haven't been in the Carmel area in a while (I hate all those traffic lights..lol) I usually don't have the CB on much. Channel 19 drives me nuts...lol
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
