I'm looking for pictures of stock 59-60 F250 4x4s with 19.5 wheels and the big front fender openings. thanks

 

Here are the two factory promo photos. Assume they have the fenders you are after, I'm not good on that part. Stu

 

Maybe I'm remembering wrong but there was a discussion on the forum about this a while back and it seemed there was some consensus that certain F250s with the 19.5s and some F350s came with the bigger cutouts like the F-500, 600.
Like these.
https://www.purplewave.com/auction/140514/item/h1952

 

The Chassis Catalog lists which fenders came with which wheels and tires. When I go back in, out in the shop now, I'll look it up. Stu

 

First, I would suggest editing your title to add description of what you're looking for. Nobody will find this with a generic title.

It's interesting that different Chassis Catalogs give different info. The November, 1958, catalog says models C, D, and Y with 17.5" wheels use fenders B9C 16005-A (RH)/06-A (LH), and models D, Y, T, and TH with 19.5" tires use B9Y 16005-A/06-A. No mention of other wheel sizes so presumably the meaning is up to 17.5" on the first and from 19.5" up on the second. I suspect Bill will have an O.S.I. reference directing us to the below info.

The 1970 catalog that covers combined 1957-1963 says 57/58 F100/350 fitted with 15" and 16" used B7C 16005-A/06-A and F250/600 fitted with 17.5", 19.5", and 22.5" are fitted with B7Y 16005-A/06-A. For the 59/60s, F100/350s fitted with 15", 16", and 17.5" got fenders COTB 16005-A/06-A and F250/600s fitted with 19.5", 20", and 22.5" got COTB 16005-B/06-B. That says the F-250 4x4s with 19.5" wheels got the big fender openings. Stu

 

Thanks Stu. That is pretty much how I remembered the last discussion but the file photos show 19.5s with the smaller wheel openings and I couldn't find any pictures of a 4x4 with 19'5s and the bigger openings.
I'm not sure how to edit my title.

 

I'll look further. To edit the title you hit edit, then the "go advanced". Lets you see the title line and allows changes. Stu

Edit - this looks like a narrow lip, but I'm out of my era to know the fine points of 57-60 bodies. Stu

 

There have been a couple threads about the wide vs narrow lip, what years and what tires. Iirc Wally has it dialed in.
This is a correct narrow lip fender with the correct 19.5 wheel and bias ply traction tire.

 

Correct Stu, that picture of a narrow lip is clearer than mine.