I was wondering if anyone has done an valve cover gasket change. I got the haynes manual but those are pretty generic. I started it is but with family it takes a while to get the job done done. I am also wanting to change the upper and lower intake gaskets.

Any links to pics and experience would be appreciated.

I have tried the Escape City Forum but it is pretty dead.

I hope this one is better!

 

Haven't done the valve covers, but the intake is pretty easy.

Depending on mileage, maintenence schedule, ect... it might be worth your while to change spark plugs and COP's while you are there.

 

If you happen to find video or a good write up please link it. Mine are leaking pretty bad but I don't want to dive in until I know what all parts I will need.