"Great News For 76-79 Truck Owners

Thanks to a long time FTE member (tetraruby) I have recently come into possession of a complete set of the FORD Original Dealership Emission diagrams & engine illustrations for all Truck engines (including cars) for the years 1977 - 1979.
It also has a few 1976 Truck diagrams.

*Note: This set is more comprehensive than the Autozone site.

Of course having the engine identity label information would be an asset,they will only be available by request as the space they would take up would be massive.
I would expect to send these privately unless the calibration number becomes quite popular then It will be in my gallery"


Anyway I could get the emissions diagram for a 1976 f100 360 c6.
Thank you

 

I really hate to reach out and ask a favor for my first post. However I have been beating my head against the wall for a emissions diagram for a 1977 F-250. It has a 460, manual transmission and is a 4x4. I live in california so it is pretty important.

 

That combo never existed

 

From the factory sure but he still has a 460 that needs an emissions diagram.

 

Engine swap, probably needs everything emissions related

 

Move out of California,

 

Probably the easiest thing to do lol

 

PM'd you about my '77 Custom 400/C6

 

i did not receive your PM.

 

Moving is not an option at this time. Guess I need to do a little creative thinking.

 

Getting that to pass smog is going to be hard, unless you find a hot smog. Unless you want to go to a smog ref and if you do make sure the engine is newer than the model year of the truck and can prove it.

 

ALL 1971/73 429, ALL 1971/78 460, some 1979 460 have a block casting number of D1VE-6015-AB or A1B or A2B and all are internal balance.

Some 1979 460, ALL 1980/97 460 have a block casting number of D9TE-6015-AB and all are external balance.

460 not available w/a M/T or 4WD until 1983.

In CA, it's the sellers responsibility that a vehicle passes the smog test.