OK ...97 f150 4x4 4.6.. transfer case shifted into 4L and it wouldn't disengage. ..l tried everything (unhook battery, jack truck up, etc etc) finally I just removed the switch motor from the TC and manually turned switch to 4L. Before I go out and buy a new switch motor I'd love to bench test mine to see if I can get it to do anything . .. any and all advice would be greatly appreciated .

 

I had a 98 f150 that would stick in 4L. what I did was step on the gas hard to spin the tires, it would bind and come out then........its not really supposed to be in 4WD on dry pavement......