97 Ford 4.6 PI Swap
#1
97 Ford 4.6 PI Swap
My friend and I are getting parts together to do a PI head and intake swap on his 97 F160 with a 4.6. We have found some heads from a 99 Expedition with a 5.4 For 100 bucks. My question is, besides the intake from a truck 4.6 PI what parts are we going to need? I usually work on the old pushrod engines so I don't have much time inside these and don't know exactly what will be needed. What all gaskets and other parts will we need to do this swap?
Thanks, John
Thanks, John
Thread
Thread Starter
Forum
Replies
Last Post