Not quite broke down in TX/AZ - map sensor???
#1
Not quite broke down in TX/AZ - map sensor???
I'm delivering the latest truck I built to Los Angeles and I'm having a little trouble 1300 miles in.
History - this was a cab off 'restoration'. It's an '02 CCSB with 147k miles all stock except new gp's, uvch's/vc gaskets, plenum inserts, RR boots, int'l bellowed up pipes, rebuilt turbo and pedestal, T500, new IPR, HPO lines, my custom veggie system and some other things. Stock injectors and tuning.
Had no power pulling an overpass west of Amarillo. Aeroforce Scangauge was reading -1.5 psi - even at wot. Talked to JimJam while I stopped at Cadillac Ranch and decided to give the MAP some Fonzi love and check the electrical connector and boom it reads 0.5 psi and runs good! For .5 mile... I smacked the MAP again and got the same results.
My destination is Mayer, AZ tonite. I'd love for someone near I-40 to loan me a MAP sensor today!! I'll mail it back next week! I have a pile of them at the shop......
History - this was a cab off 'restoration'. It's an '02 CCSB with 147k miles all stock except new gp's, uvch's/vc gaskets, plenum inserts, RR boots, int'l bellowed up pipes, rebuilt turbo and pedestal, T500, new IPR, HPO lines, my custom veggie system and some other things. Stock injectors and tuning.
Had no power pulling an overpass west of Amarillo. Aeroforce Scangauge was reading -1.5 psi - even at wot. Talked to JimJam while I stopped at Cadillac Ranch and decided to give the MAP some Fonzi love and check the electrical connector and boom it reads 0.5 psi and runs good! For .5 mile... I smacked the MAP again and got the same results.
My destination is Mayer, AZ tonite. I'd love for someone near I-40 to loan me a MAP sensor today!! I'll mail it back next week! I have a pile of them at the shop......
#3
#5
#6
anymore probs sky, in LA, throw a bone dude..i'll be in OC tomorrow and close by come monday and tuesday. Me and buddy gots time to kill come start of week.
from I-40 / needles, its smooth sail'n from there to la, bud...just make sure you fuel up, cuz, theres nothing from needles til you hit barstow. Stop there at Del taco and get the "original" $1.00 tacos...you'll thank me later
from I-40 / needles, its smooth sail'n from there to la, bud...just make sure you fuel up, cuz, theres nothing from needles til you hit barstow. Stop there at Del taco and get the "original" $1.00 tacos...you'll thank me later
#7
Trending Topics
#9
#10
Btw Brad, I did the penny mod to these door locks. Next time I think I'm just gonna do the aftermarket actuators... I had hours invested in taking those damn things out and fixing them!!
#12
#13
Hahaha, no grey dog - but I'd love a veggie-powered jet!! I spent more money on tolls in Oklahoma than I will on fuel for the whole trip.
Btw Brad, I did the penny mod to these door locks. Next time I think I'm just gonna do the aftermarket actuators... I had hours invested in taking those damn things out and fixing them!!
Btw Brad, I did the penny mod to these door locks. Next time I think I'm just gonna do the aftermarket actuators... I had hours invested in taking those damn things out and fixing them!!
#14
It's all internal to the little motor in the door lock actuators.
Same as the aluminum-foil "fix", but you tin-snip a penny to the same size as the varistor, and plug it in place of it.
See: https://www.ford-trucks.com/forums/4...cks-fixed.html
Just did the Turner and Will Rogers last month, and the tolls aren't all-that-bad. Unless, of course, you are spending NOTHING at all on fuel!
Pop
Same as the aluminum-foil "fix", but you tin-snip a penny to the same size as the varistor, and plug it in place of it.
See: https://www.ford-trucks.com/forums/4...cks-fixed.html
Just did the Turner and Will Rogers last month, and the tolls aren't all-that-bad. Unless, of course, you are spending NOTHING at all on fuel!
Pop
#15