55mph turning 4000rpms?
#16
#17
#18
#19
Alright guys don't give me to hard of a time. I took the casing off of my Tach and there was a little switch there on the number 6, haha. I'm guessing now that it's on 8 it will probably read around the right rpms. I didn't know the switch was on the inside of the TACH.
#23
With 33s and 3.50 gears in 4th gear 2,000rpm will be about 50mph. I ran this truck for years with no speedo and had 33s.1,500 rpm was about 40 and 1,000rpm was like 27mph.
The same truck with 4.10s and 33s 3,000 was roughly 60. 2,000rpm was about 40mph
Same truck still with 4.10s and 37s. 2,200rpm was 60mph.
This was all by factory tach and using those radar signs on the side of the road, all in 4th gear on a NP435 so 1:1.
The same truck with 4.10s and 33s 3,000 was roughly 60. 2,000rpm was about 40mph
Same truck still with 4.10s and 37s. 2,200rpm was 60mph.
This was all by factory tach and using those radar signs on the side of the road, all in 4th gear on a NP435 so 1:1.
Thread
Thread Starter
Forum
Replies
Last Post
gotjeepzj
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
08-12-2009 07:24 PM
fordeverpower
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
22
09-05-2003 08:48 PM
Idaho
Clutch, Transmission, Differential, Axle & Transfer Case
12
08-20-2002 02:28 PM