Lisle tool help!!
#1
Lisle tool help!!
I am changing my plugs in my 07 fx4 and the first one came out nice. The second one all i got was the nut and threads piece of the plug. I have the lisle tool from oreillys but i cannot use it because the electrode and the upper ceramic piece are still attached to the sleeve. I put the threaded part back on for now but i dont know how to go about either trying to break it flush with the head so i can use my tool or trying to pull it off with pliers out of the sleeve. I have the other two on that side about a quarter of a turn loose and soaking in kroil overnight while i research this. Has this happened to anyone else? How should i get the top part out of the hole? any help is appreciated, thankyou.
#2
#3
I have seen this before but i was trying not to have to buy two special tools. Thanks for posting. I have heard that the top piece will pull out with needle nose but i am scared of messing it up to bad. Right now the way it is i think i can put the threaded piece back on and drive it untill i get this tool but i dont know of anywhere to get it except online. Are there any stores that sell something like this?
#4
Thread
Thread Starter
Forum
Replies
Last Post