Free to a good home / Wanted parts requests 1987 - 1996
#587
Hey gents. I've got a '93 F150 extended cab and I am looking for VINYL bench seats. I've got cloth seats, in pretty decent shape (tear on side of driver seat where they always tear). I would like vinyl as it is a work/hunting truck and don't feel like keeping cloth clean. Thank you! (I am in NC)
#588
#589
#590
Did they still have the 5 on 5.5" lug pattern? If so they may very well work. I don't know what yr truck the wheels came off of, butthey are on my 87 Bronco.Thank you.
#592
Where are you located? If you are in south central Missouri I have one I will give you. Took it off a 94 and it came off easy. Bolts, clips and everything.
#594
#595
Fuse Block
I'm pulling my diamond plate running boards off my 92 F250 in the next few weeks, they're for a regular cab, anyone want them?
Also, i'm parting out my 87 F150, most of the big stuff is up for sale, but if someone needs little knick knack (easy to pull parts) hit me up...
Also, i'm parting out my 87 F150, most of the big stuff is up for sale, but if someone needs little knick knack (easy to pull parts) hit me up...
I also have a 87 F150 5.0L E4OD 2WD XLT Lariat.
I desperately need the white fuse block as the corners for the screws are broke off.
Mine is very specific in that there is a flasher unit on both the front and one directly behind in the the back and I do not know how the wires are attached in the back so I probably need the entire wiring loom.
This may be a duplicate request and if so I apologize.
Please advise
Boon
P.S. There are a few 87-89's at the boneyard but they do not have the back flasher.
#596
Radio
I am going to the boneyard today and I have noticed several trucks with radios.
I have an 87 and there some 89's there so I will look.
They are AM/FM with a cassette player.
Will this work for you?
Please advise
Boon
I have an 87 and there some 89's there so I will look.
They are AM/FM with a cassette player.
Will this work for you?
Please advise
Boon
#597
i have 96 f350 4x4 auto w/od drw
i need the transfer case linkage rod
if some one out there has this you can contact me at brianbondo@yahoo.com
thanks
brian
i need the transfer case linkage rod
if some one out there has this you can contact me at brianbondo@yahoo.com
thanks
brian
#598
free for pickup, for your pickup....
1/2 ton rear end from drum to drum. has a bad/wasted pinion bearing.
it's the rear rear out of my 95 f150 4x4. 3.55 gears. apparently the noise I thought was the tires howling, was not. then within a week or so, the pinion bearing started going. you can move it about 1/8" in every direction. it was easier / cheaper / quicker for me to swap in a known good used rear, to get back on the road, then take it somewhere to rebuild it.
i'll prob end up just taking it for scrap at one point, unless someone wants to pick it up. located in Annville pa (17003)
1/2 ton rear end from drum to drum. has a bad/wasted pinion bearing.
it's the rear rear out of my 95 f150 4x4. 3.55 gears. apparently the noise I thought was the tires howling, was not. then within a week or so, the pinion bearing started going. you can move it about 1/8" in every direction. it was easier / cheaper / quicker for me to swap in a known good used rear, to get back on the road, then take it somewhere to rebuild it.
i'll prob end up just taking it for scrap at one point, unless someone wants to pick it up. located in Annville pa (17003)
#599
Hey Sonic, I feel your pain, my 1990 f150 had the same?(inner or outer input shaft bearing) failure in it's 308 diff. same fix, replaced it with one from an 88 wreck, same ratio. I even got ahead on the deal, the replacement unit had a factory sway bar assembly that my Canadian built truck lacked. "Canadian built" my new term for "Better take SAE and Metric tools with ya!" Thinking of using my left over unit in a build-a-trailer project since I cant give mine away either! lol