Hello and thanks in advance.

Could someone provide the part numbers for the parking brake levers (inside the brake drum that the park brake cables snap into) for a 77 F250 4WD with Dana 60 rear? I know the root numbers are 2A637 (right) and 2A638 (left) but don't have a clue as to what the prefix and suffix are.
I also need the part number for the thick washer that goes on the lever at the pivot point between the lever and nut. I tried the local dealer but they couldn't look up anything that old.

Thanks, I apperciate the help.

 

Lever, parking brake operating
76-up E/F250-350 w/ 12 X 2 1/2 & 12 X 3 brakes
D6TZ-2A637-A
D6TZ-2A638-A

Retainer, parking brake operating lever
C8TZ-2106-A

 

I was only able to locate one each of the levers and the same dealer has both.
Robinson Ford Sales
Calexico, Ca
(760) 357-3141

On the washer Dennis Carpenter Obsolete in Concord, NC is your best bet.
They show 11 in stock. Most of the other dealers that have them have 1 and only a couple have 2 in stock
Dennis Carpenter Obsolete
Concord, NC
(704) 786-8139

 

mikeoOoOoO,

Thanks so much for the help. I really appreciate it.