Does anyone know what these are? They are all for sale. Lots of special tools


014-00930 7.3L DIT ENGINE
Release Tool for Injector Connector
2005 FORD GT CLUTCH, GEARSHIFT,AUDIO
FUEL DELIVERY MODULE
OTC 4X46/4F55N
EVAPORATIVE EMISSION SYSTEM TESTER 134-00056
BREAKOUT BOX'S
T96P-12A650-A
T96P-12A650-B
T96P-12A650-C
007-0053
007-0054
007-0055
007-0057
007-0058
007-0059
007-0083
007-00103
007-00108
007-00115
007-00116
T90P-50-ALA
T79--50-EEC-II
T80--50-EEC-II
T83L--50-EEC-Iv
2005
TKIT 2005D1-F(BOX 1 OF 4)
TKIT 2005D1-F(BOX 2 OF 4)
TKIT 2005D1-F(BOX 3 OF 4)
TKIT 2005D1-F(BOX 4 OF 4)
TKIT 2005P-F( BOX 1 OF 3)
TKIT 2005P-F( BOX 2 OF 3)
TKIT 2005P-F( BOX 3 OF 3)
TKIT 2005D2-F(BOX 1 OF 3)
TKIT 2005D2-F(BOX 2 OF 3)
TKIT 2005D2-F(BOX 3 OF 3)
TKIT-2005-F
TKIT-2005 S-F
TKIT 2005D-F
2004
TKIT-2004J-F BOX 1
TKIT-2004J-F BOX 2
2003
TKIT-2003D-F
TKIT-2003D-TBIRD
TKIT-2003 N-F LIFITING HEADS
TKIT-2003 N-F INJECTOR'S
TKIT-2003 N-F BOX 3
TKIT-2003 N-F BOX 4
2002
TKIT-2002N-DEW
TKIT-2002N-F/FM DRIVE SHAFT
TKIT-2002N-F/FM Box 2
TKIT-2002- F/FM
TKIT 2002 D-FLM
2001
TKIT 2001 FLM
2000
TKIT 2000 F/FM/FLM
1999
TKIT-1999S-FLM/LT
T99T-1000-E
T99L-1000-D
T99L 1000 A
T99L 1000 E
TKIT 1999-F/FLM/LT
T99T-1000-A
T99T 1000 F
T99T 1000 C
T99T 1000 B
TKIT-1999A FM/FLM
TKIT-1999 B FM/FLM
TKIT-1999 C FM/FLM
TKIT-1999D FM/FLM
TKIT-1999M FM/FLM
TKIT 1999A F/LT/1000 D
1998
T98L 1000 F/FM
1997 T87T-1000-A
T97T-B
T97T 1000 F/FM
T97P 11--
T97L 1000 FM/FLMH
T97L 1000 A
1996
TKIT-1996-F/FM/FML
T96P-50
TKIT-2001-FLM
T96T
TKIT -1996-FLMH
T96 L 1000 A
TKIT 1996 F FM FLM
1995
T95T-1000-F/FM/LT
T95T-1000-F/FML/LT
TKIT-1995-F/FM/LT/FLM
T95T
TKIT 1995 FM/FLM
T95L-1000-FM/FML
T95T 4000 A
T95P 18036 AH
T95T 6510 --
TKIT 1995 F
TKIT 1995 F 3---
1994
T94T
T94P-6000
T94P 7000
T94L 1000 FLMH FMH
T94P 1000 FLMH FMH
T94P 1000 A
TKIT 1994 F
TKIT 1994 FH/LTH
T94T 1000 AA
T94P 77000 A1
T94P 77000 A2
1993
T93L-1000-FH/LTH
T93P-
T93P 1000 FM/FLM
1992 T92C
T92P 35--
TKIT 1992 FH/FMH
TKIT 1992 1/2
1991
T91T- Hub Seal replacer
T91P 65--
TKIT 1991 F/FM
1990 T90P
T90P 19623 AH
T90T 4000 --
TKIT 1990 1/2 FH/FLMA/FMH/LMH/MH
T90P 1000 A
1989
T89T 802S F
T89P
T89P 56--
T89T 70010 A
T89T 1000 AH
T89P 65--
T89P 1000 A
T89P 1000 B
T89P 6000 B
T89P 1000 AH
1988
T/TKIT88P-1000-L/LM/FLM
T/TKIT 88C/1000/SF
T88T
T88L-1000-S
T88P-1000-L
1987
T87L-1000-S ANTI LOCK, RADIO REMOVER
T87T-1000-A
T87T-7000-S
T87T-4946-A
1986 TKIT 1986 FLMH
T86P
T86T 1000 S
1985
TKIT-1985-FH1
TKIT-1985-FH2
T85T-1000-A
T85T-7034-BH
1984
TKIT 1984 F
TKIT 1984-D.20
1983
T83T-1000-F
TKIT-83-D6.2
TKIT- 1983 D2.2
T83P-1000-FH
T83T-4000-A
TKIT 1983 D6.9
1982
TKIT-1982-F
TKIT 1982 FH
1981
1980 T80--50-EEC-II
1979
T79P-4200-AX
T79T-1000-F
T79P 4020 FX
T79P 4020 P
1978
T78P-3504A
T78P 4200 A
T78P 3504 A
1977 T77L-7025-F
TKIT-1977-S
T77J 7025 --
T97T 1000 A
1976
1975 T75L-7025
T75L-7025-A

 

Appears they are all specialty tools of some sort. If you Google the part numbers, you should bw able to figure out what they are.

On the other hand, I'd be a little suspicious if someone is just selling all those tools by the part numbers and doesn't know what they are for. That smells like stolen tools to me.

 

I don't know about that,,, but I just bought a crank seal install n removing kit for the 6.0. He said he will ship it tomorrow. I can't see them all being stolen. I was told there are pallets of tools in Austin TX. I guess if they stole a whole semi full of them. I just thought I would post it in case someone is looking for a specific tool. I will follow up on here once I receive my tools. They are supposed to all be rotunda.

 

So where did you score yours from Anthony? A closed down Ford dealer?

 

I think so. I don't have it in my hand yet so we will see. I'm google ing rotunda part numbers trying to see what I need, or could use. Once I get them, I will post pics and tell you what I paid.

 

Pm sent mike. Do you know or have a list of rotunda tool numbers for the 6,0???? The pic I was sent


He said mine was missing the egr claw,,, I don't have an egr neways.

 

I don't have the list for the 6.0, since I have the 7.3

These are from a closed down dealership. He is on the up-and-up with the tools, as he owned the dealership that closed. They are in a warehouse, and he wants them gone. He has quite a lot of tools for the 80's and 90's model Ford trucks/cars. He also has several tranny and axle kits for the early 2000's Ford explorer/expeditions. He has a mountain of Ford truck parts, too. But Ford showed up and offered to buy all of them back from him. If they had not already inventoried them, he would have let me in there to go through them....oh, well.

I bought the axle kits for the dana 50/60/135, the kit for the 4r100, 271/273 transfer case kit, and the kit for the 10.5 rear end. Also got the kits for the F250/350 ball joints and steering knuckle/outer axle seals. Paid $725 for all of those kits in a package deal.

He knows I'm a police officer. He will not do you wrong if you want something on the list.

 

Hey Mike, I figured I'd post the numbers he gave me. I got the payment form faxed twice, and I emailed it. I hope he got it. I asked him in an email about another set I could use. how far do you live from him? Definitely a score. Hope shipping isn't too much.

 

Wonder where Sean is,, I wouldn't have known bout this if it wasn't for him.

 

I'm about 45 minutes from the warehouse. It is in central Austin. UPS ground shouldn't be too much.

HAHA...the claw missing from your 6.0 kit is selling for $425 from a tool vendor. Just the claw!!!

 

Be careful:

Valued tools stolen from car dealership
Tools roughly estimated to be worth thousands

Updated: Tuesday, 14 Feb 2012, 6:09 PM EST
Published : Tuesday, 14 Feb 2012, 12:46 PM EST

Drew Blair
DECATUR, Ind. (WANE) -- Police in Decatur are investigating the theft of high valued tools from the Courtesy Ford dealership located on South 13 th Street.

Detective Corral with the Decatur Police Department said the tools were discovered to be missing Monday morning from several large sized tool boxes. The dealership's service manager found the drawers of the storage boxes open. Police were told that mechanics have always been in the habit of locking the boxes when leaving work.

Mechanics for Courtesy Ford are compiling an inventory to log exactly what is missing and the net worth of the stolen items.

According to police, one mechanic roughly estimated his personal loss to be worth between $10,000 and $20,000. Some of the tools have been considered irreplaceable since they were handed down from elder family members.

Investigators believe the theft happened sometime between when the dealership closed at 3:00 p.m. Saturday and Monday morning.

Corral said there was no reason for investigators believe this to be an "inside job." They did not have any leads as of Tuesday afternoon as the investigation continued.

Anyone with information regarding the theft is asked to call the Decatur Police Department at (260) 724-3123

 

I was just gonna ask if he had the outer seal driver for the axle seals. I guess you already swiped it. . Better luck next time.

 

Ray, the guy that has these tools just called me confirming what I'm getting before he goes to the ups store to ship. I think his story is good and I'm in full confidence of the sale. I'm doing research on a couple other tools now, he has about 250 kits. He has them organized by year. I'm gonna follow up on this after I have the tools in hand. He said there are two dealerships wanting to send a box truck to get it all, and he said he's gonna let them go. If we want any of this,,, we better get to it.

 

Anthony, everything in that kit is all you need for your build. In it, you have your front & rear crank seal remover/installers, the cylinder head lifting bracket as well as the alignment tool needed to time the cam and crank.

 

Very cool,,, this is the actual kit in getting


I'm really wanting the slide hammer and the rocker arm release tool also.