Guys - hoping someone has some experience here. I have a 351 Windsor in my 55 and want to replace the stock exhaust manifold with some headers. Noticed the steering column and box (stock) is fairly close and wondering if someone out there can direct m to headers that will fit.

 

http://

 

I ran into the same problem with my '50 F-2 with stock flathead V-8 while adding power steering. Somebody here on FTE recommended Reds Headers. I contacted them by email and they came back with a prompt and positive answer. They seem to know how to make headers for a variety of applications. You might want to check with them.