I just got given a 31' 5th wheel trailer by a friend to house my model train project. So, I started pulling crap out of the back yard to make room, and get everything together for a toter to pull it. It doesn't look like one of the fire trucks is going to happen, so I'll rebuild my Big Job, and make it the toter. One of the things pulled out of the back yard, is the '53 F-600 frame. It's getting cut up, and going to get scrapped. It has the complete front, and rear suspension, and a complete hub to hub Eaton 2sp rear end. It's the 5.??/8.?? geared rear end, not the 6.??/9.??. First person that wants it, let me know, or it's getting crushed too. I'm keeping 3 feet out of the center of the frame, and everything else is going away.


Joe.

 

Does it have wheels on it? If so, what size/bolt pattern are they?

 

Man I could really use those front springs but too far away. If you end up scrapping the rear, pull the two speed motor off of it. Those things are wanted.

 

Yes, but they are the big 5 lug widow makers.

 

Find out how much shipping would be, and you can have them. I'll keep the motor attached to the diff.

 

Shoot! The big is good. The widow makers, I already have...