Where can I buy a new throw out bearing for my 51 with the big 4 speed? I would like to find one at a local parts store, because I am ready to put the trans back to the engine. I have not had any luck so far....

 

AFAIK it's the same for all trannies behind the flat V8 or small OHV six. I'd say try NAPA, but I just checked and they now have NO clutch parts for a '52!!! I bought all my clutch parts there about 5 years ago. MAC's has it, Ford Pickup Truck Clutch Throwout Bearing - Top Quality - All Engines - MAC's Antique Auto Parts

They also have the hub if you need it.

 

i just bought a complete clutch presure plate and throwout bearing from the nappa in hHillsboro OR 2 months ago

 

C0TZ-7580-A (replaced A-7580, 78-7580 & 78-7580-A) .. T/O Bearing / BIN: 2065

Applications: 1948/52 I-6 & V8 Trucks except F7 and larger trucks / 1953/64 F100/700 I-6 & V8 // 1928/47 all I-4, I-6 & V8 Trucks & Passsenger Cars except 1937/39 V8 60.

BIN: Bearing Industry Number, what autoparts stores, bearing shops go by.

Note: The T/O bearing does not come with the collar on vehicles of this vintager, it was only available by itself.