EDGE ez module
#1
EDGE ez module
Hey guys. Probablly another dumb question for a newbie. My truck has what was originally thought by me to be an EDGE programmer. Upon more research I found out that it is an EDGE EZ module. Model 10200. It connects on to the ICP. I read the "read first" about EDGE programmers but my question is this:
Does this affect my PCM like what was disscussed on the "read first" threads?
Or is a programmer and an EZ module two different things? My thoughts are that there different and dont affect the PCM at all, but just want to hear it from the experts.
If it is tied into the PCM, if I disconnect it will the PCM go back to stock program , or do I have to get it reset?
And finally if I leave it connected will it cause damage?
Thanks again ahead of time.
Does this affect my PCM like what was disscussed on the "read first" threads?
Or is a programmer and an EZ module two different things? My thoughts are that there different and dont affect the PCM at all, but just want to hear it from the experts.
If it is tied into the PCM, if I disconnect it will the PCM go back to stock program , or do I have to get it reset?
And finally if I leave it connected will it cause damage?
Thanks again ahead of time.
#2
#4
#7
Thread
Thread Starter
Forum
Replies
Last Post
brwolfjr
1999 - 2003 7.3L Power Stroke Diesel
3
02-09-2005 08:23 PM