Hello all well truck was in the stealership this past week and well one of the things they did was reflashed my ECM and now my edge does not work. I can't return it to stk as it will not let me. I have a new Hex number from the orignal one. It says to call tech support but there closed till monday. What do i do????


Mark

 

Anybody?????

 

Well i just happened to check my email and edge emailed me back today on a saturday... i was shocked, I just emailed him back waht he asked for and i hope this can be fixed.

My main reason for the truck in the dealer was the recall on the airbag issue. and i had a loss of power and hard start well they found a leaking injector and i had autolight plugs put in it 1500 miles ago well all the plugs the electrodes literally melted and was causing a lose of power... They updated my ecm with my gear change and tires... Truck is running real good now.... I is happy again.

Mark

 

Sounds like you are on the right track. Edge will probably have to issue new programs for the module after you supply them with the info they need. Always, I repeat, ALWAYS program back to stock before taking in for work at dealer.

 

Edge got back to me yesterday (Sunday) and all is well now.... Truck runs great.

Mark

 

That's good news. That was fast.

 

Its actualy fun to drive this truck again.. 106,000 miles and it is running strong... pullin the 30 ft toy hauler to FL in 28 days!!!