Hello, I am looking for the fuel tank kid plate for the smaller tank. I have an 82 f150 regular cab shortbed. I scoured my local JY, found one but someone had cut part of it off . If anyone sees one, let me know! I am located in connecticut!

Keyul

 

80-86 Rosewood trim horn pad
Lariat cab emblems

 

I'm putting a 92-96 tailgate on my 85 & I need the hardware that go's on the bed. I believe I have all the hardware that go's on the tailgate.

 

I have a 91 that has a junk box, should be able to set you up.

 

Cool! Let me know!

 

Do you need just the pins, or do you need the area that it bolts to as well?

 

The only thing I have is the tailgate & the hardware on IT. I don't have anything that go's on the bed itself. I believe I have everything for the tailgate, so if you have that as well, I might just go ahead & get that for safeties sake!

 

I believe it is welded in, so I would have to torch it out. I'll have to look at the 85 sitting next to it and see what would be needed to be done to match the two.

 

I'm looking for F150 SROD toploader trans parts. 1st 2nd slider, reverse idler slider gear and the plastic reverse lock out plate that goes under the shifter. Pictures of needed parts are here.
TransParts pictures by micman_photos - Photobucket

 

Looking for the FORD style stamped tailgate like this. Hopefully in Alberta, possibly BC depending on location. No bow, small knuckle dents or less, minimal surface rust. I don't need internals.

 

Pulling the 300-I6 out of my truck today. If anyone needs external motor parts, or a complete running motor (drove it 75 miles yesterday), let me know. Best to email me. ronbelldvm at gmail dot com. PMs also will checked, though.