You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I'm going to install a 10'X10' roll-up door where the old sign is. and a 10'X9' door in the wall to the left of the picture.
This is the wall where the new 10'X9' roll up door will go. This part of the building will be used as a paint and bodywork area, with a dedicated paint booth at the rear of the building.
This is the back of the building. The overhead steam pipes will be removed and a new cyclone fence installed back 50'X100'. Lot's of room for projects!
This is a shot of the main shop area. The "false" ceiling is coning down and the wall height is 13' so I can get some big stuff in there!
The doorway at the far end of the shop leads to the bathroom, a storage room, and the office.
This is a shot of the other end of the main shop area. Lots of room for projects!
Not a bad deal for $30,000, and my payments are only $197.99/month!
More to follow as I proceed to make this my dream shop................
__________________
Oregon Chapter Leader My friends call me Don.
"I always keep a supply of stimulants handy in case I see a snake, which I also keep handy" WC Fields
Cool, I like it. Will be glad to see more pictures of the progress
__________________
Allen D
1966 F-100 4x4 with 390 GT engine
1990 Areostar 2wd XLT ext
1980 Bronco with 460
1976 F250 4X4 Custom with 429
Oregon Chapter Member: To join the Oregon Chapter, click HERE
I've done a lot of "good deeds" over the years, so maybe this is due...............
__________________
Oregon Chapter Leader My friends call me Don.
"I always keep a supply of stimulants handy in case I see a snake, which I also keep handy" WC Fields
Will there be a big ol' pot-belly stove, resurrected from somewhere, for the local boys to sit around and "chew the fat" witcha'?
I can find only one L-shaped building on the "base" that could be your shop. Is it directly east-southeast, across the street, from what appears to be the biggest building on base, the one with the dark roof?
So do I Marv, so do I..........Just wish I didn't have to wait 62 years..........lol
Will there be a big ol' pot-belly stove, resurrected from somewhere, for the local boys to sit around and "chew the fat" witcha'?
Since I do quite a lot of work for the loggers around here, You Bet!
I can find only one L-shaped building on the "base" that could be your shop. Is it directly east-southeast, across the street, from what appears to be the biggest building on base, the one with the dark roof?
The land out back is yours, too?
That would be the one, and I get a new fenced in area behind the building 50'X106'
Pop
Quote:
Originally Posted by Bwillden24
Congrats on the shop!! Look forward to seeing the completed progress!!
Thanks! It's been a long time coming....................
__________________
Oregon Chapter Leader My friends call me Don.
"I always keep a supply of stimulants handy in case I see a snake, which I also keep handy" WC Fields
It's refrigerated, it works, and I live in the desert.............Of course I'll keep it!
__________________
Oregon Chapter Leader My friends call me Don.
"I always keep a supply of stimulants handy in case I see a snake, which I also keep handy" WC Fields
Thanks Steve! It's been a long time coming.........
__________________
Oregon Chapter Leader My friends call me Don.
"I always keep a supply of stimulants handy in case I see a snake, which I also keep handy" WC Fields
Is that your ski boat with the straight 6 merc?...............those 2 stroke mercs will embarrass many a boat with big v8 automobile engines in them........they were built with nothing but flat-out performance in mind.
Are the USAF coffee pots still there?........I have "some" experience dealing with those.
The place is gonna be great, Don!
__________________
93 F-250HD SC 460 E4OD
96 Explorer Limited 4.0 V-6 OHV
93 Ranger Splash 2.3 5spd only 51,000 miles!
84 Ranger 4x4 2.8 V-6 5spd......needs a new TK-5 trans, PM if you have one!
Dave
Oregon Assistant Chapter leader: To join the Oregon Chapter, click HERE
__________________
Chris 1989 F-250 Super Cab 4x4 5.8L 5 speed now calling Frankenstein
Oregon Chapter Member
"There are only two ways to live your life.
One is as though nothing is a miracle.
The other is as if everything is. "
~ Albert Einstein~
Is that your ski boat with the straight 6 merc?...............those 2 stroke mercs will embarrass many a boat with big v8 automobile engines in them........they were built with nothing but flat-out performance in mind.
Are the USAF coffee pots still there?........I have "some" experience dealing with those.
The place is gonna be great, Don!
The boat belongs to someone else. I'll have to check on the coffee pots......
Quote:
Originally Posted by glovemeister
If you decide to get rid of that sign Don let me know, I'd love to buy it. Is that the old radar site near Condon?
How about I GIVE ya the sign........
Yes, it is the old radar site West of Condon.
__________________
Oregon Chapter Leader My friends call me Don.
"I always keep a supply of stimulants handy in case I see a snake, which I also keep handy" WC Fields
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
My New Shop ( another work in progress...)
-Marv- one of 
