annaleigh
July 9, 2017
The bolt with the light shining on it may be the one you are having trouble with. I dont think it will do any good to try to remove it from inside as there may be another nut against the firewall. Also if the ECM connector goes through the slot in the bottom of the evaporator housing, then the connector has to come loose before you can remove the housing.. Then you should be able to access the nut you are having trouble reaching..
Original Thread
A/C Evaporator Core on a 1990 E350More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!