04badford
April 30, 2015
I forgot the best part as I still have to do the other door, when the stator is out you will see a small flat maybe 1/2'' x1/2'' x1/16'' plate it sits in the plastic piece of the stator take it out and add a small piece of Alumum foil at the bottom to build it up slightly you will see the contacts go just below that stuff it in then add the plate back on top spin the stator and ( note there are two small washers on the stator shaft these go behind the Brushes in the plastic piece ).
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!