Replacing rear quarter panel on 2006 Ford Expedition - Easily done?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-26-2017, 08:49 AM
malsdad's Avatar
malsdad
malsdad is offline
New User
Thread Starter
Join Date: Jun 2017
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Replacing rear quarter panel on 2006 Ford Expedition - Easily done?

I would like to replace the small rear quarter panels on the back of my Expedition. They seem to be held in by two screws. I did locate an Expedition at a local junk yard that has the same year and color. My question is, do these come off easily? Is it as easy as taking off two screws? I've highlighted the part in the photo.




 
  #2  
Old 07-23-2017, 10:26 PM
seca2racer30's Avatar
seca2racer30
seca2racer30 is offline
New User
Join Date: Jun 2017
Location: Gainesville
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Those are just part of your rear bumper cover and you will have to remove the entire cover. Once you have the rear cover off you will see the fasteners holding them to the bottom cover. Should only take 45min or so do the whole job. Good luck.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
neuscda
1997-2006 Expedition & Navigator
2
06-23-2015 09:08 PM
Scott Andrew
1997-2006 Expedition & Navigator
2
04-12-2006 04:43 PM
BVIV2
Electrical Systems/Wiring
2
06-08-2002 12:23 PM
trout_chaser
1997-2006 Expedition & Navigator
4
07-27-2001 07:06 AM



Quick Reply: Replacing rear quarter panel on 2006 Ford Expedition - Easily done?



All times are GMT -5. The time now is 03:47 PM.