cut in foam around sub
Thread Starter
|
New User
Joined: Aug 2001
Posts: 3
Likes: 0
cut in foam around sub
i got a descent system in my truck. i got 2 12" kicker comp VR and a 500 watt rockford amp and 2 pioneer 6x9's. i had a problem i found a small rip in one of the subs on the foam on the outside. can this be fixed easily at all or is the sub junk?
Elder User
Joined: Oct 2000
Posts: 642
Likes: 0
From: Nebraska
cut in foam around sub
After accidently stabbing a screwdriver through the surround on my Kicker Comps(DOH), I just used a little superglue and fixed it. It still sounds ok, It wasn't a very big rip.
Freshman User
Joined: Aug 2001
Posts: 34
Likes: 0
From: Lexington US
cut in foam around sub
I put a screwdriver though one of my brand new fosgate hx2's. Even though these have a rubber surround, i used some black electrical tape. i know its pathetic but its behind my truck seat so i don't care. As for the sound, its perfect.
henry
94' f150 302 V8
2 fosgate hx2 8's and a power 500.2 fosgate amp
henry
94' f150 302 V8
2 fosgate hx2 8's and a power 500.2 fosgate amp
