When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks for the quick reply, going to order these.
Can you post another picture of a top down and maybe side view from the tire towards the other tire. Like to see how these tuck them closer to the body.
Thanks for the quick reply, going to order these.
Can you post another picture of a top down and maybe side view from the tire towards the other tire. Like to see how these tuck them closer to the body.
Bought a set of snow tires for the sled trips up north, there the KO2 It's all yer fault after reading the Michelins were a better summer tire and I would need something beefier for the snow! I'll pass the Hat around. Holy **** are these Pricy up in Canada Land !
Such an easy install. There are studs on the inner rocker that you hang the brackets on and j-nuts clipped into the bottom side of the running boards. Any j-nuts that fall out of the boards can be replaced with the supplied hardware. It takes about an hour or less. Good luck
-Replaced the grill with the base model black grille
-Added the LED strip on the frame per what others have done here
-painted my front emblem and side badges flat black.
-removed 4x4 stickers
How did you paint emblem and side badges? Were you able to remove or di right on truck. I have base model black grill also. thx
Finally got around to installing the 3 red marker lights above the license plate. Attached the Putco chrome cover over the tailgate handle plastic area and had a chrome exhaust extension welded on. Installed front wheel well liners too. Thanks to JAX250 on the assistance offered on the light install.
where did you get 3 red marker lights n how much approx?