Mustangking1's 1978 F250 Build
Thread Starter
|
Tuned
Joined: Jan 2013
Posts: 419
Likes: 1
From: Oklahoma City
Would someone be able to tell me how wide of hose I will need for the aux tank?
I dont want to disconnect it yet since I dont want to get dirt and stuff in my tank with it disconnected. Even if someone had the metal fuel filler neck that attaches to the bed I could use that measurement also!
I dont want to disconnect it yet since I dont want to get dirt and stuff in my tank with it disconnected. Even if someone had the metal fuel filler neck that attaches to the bed I could use that measurement also!
Thread Starter
|
Tuned
Joined: Jan 2013
Posts: 419
Likes: 1
From: Oklahoma City
Worked on wire wheeling the front part of the frame where there is about 1/2 inch of grease and stuff built up on the frame. Decided to take the front cab mount inspection plate off to take a look inside, found this,
Also does anyone have any info on transcool transmission coolers, my truck has one and I'm looking for info about it.
Also does anyone have any info on transcool transmission coolers, my truck has one and I'm looking for info about it.
Thread Starter
|
Tuned
Joined: Jan 2013
Posts: 419
Likes: 1
From: Oklahoma City
Got tires on it today, brand new 16.5x8.75 Firestone Transforce HT.
On the way home I was driving and the engine started running rough, then wouldn't start. Rolled it into a parking lot. Got picked up got some tools and 1 new fuel filter, hose clamps, and a can of starter fluid I got it started again. Drove home. It's running better now then it did before.
I should have listened to the PO when he said I might want to keep a couple spare fuel filters in the glove box.
I almost didn't get it fixed, my local oriellys didn't have the filter, but my local autozone did, thank god.
No pictures.... Sorry
On the way home I was driving and the engine started running rough, then wouldn't start. Rolled it into a parking lot. Got picked up got some tools and 1 new fuel filter, hose clamps, and a can of starter fluid I got it started again. Drove home. It's running better now then it did before.
I should have listened to the PO when he said I might want to keep a couple spare fuel filters in the glove box.
I almost didn't get it fixed, my local oriellys didn't have the filter, but my local autozone did, thank god.
No pictures.... Sorry
Thread Starter
|
Tuned
Joined: Jan 2013
Posts: 419
Likes: 1
From: Oklahoma City
Pulled the rear window out to replace the seal.
Window out:
New seal installed:
Gonna get the rear window reinstalled on the cab tmrw.
Soon the floor pans will get welded in then alot of action will start.
I have new door seals, carpet, carpet kick panels, dome light lense, floor mats all waiting to get installed.
Window out:
New seal installed:
Gonna get the rear window reinstalled on the cab tmrw.
Soon the floor pans will get welded in then alot of action will start.
I have new door seals, carpet, carpet kick panels, dome light lense, floor mats all waiting to get installed.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Tuned
Joined: Jan 2013
Posts: 419
Likes: 1
From: Oklahoma City
No, it did not break but I couldnt find the correct seal for it. The seal I bought was for solid rear glass so i just went and bought solid rear window.
Posting Guru
Joined: Jul 2013
Posts: 1,685
Likes: 2
From: Oregon
Thread Starter
|
Tuned
Joined: Jan 2013
Posts: 419
Likes: 1
From: Oklahoma City
Got new floor pans welded in today, took the 5th wheel hitch unbolted out of the bed, also replaced the radius arm bushings on the drivers side today. Tmrw I will get the holes in the bed filled in from the 5th wheel hitch.