Original and in great shape, want it gone, $100.00 for members, asking 150 on kijiji.

 

Looking for rims just like the one in the picture, 5 x 41/2 bolt pattern, looking for two of them.

 

Im looking for a solid turn key 351m from a truck .
I have parts that I would be willing to trade

 

SCT Xcal3 tuner for '04-'08 F150/5.4L trucks. Has 4 vin locks left, has custom tunes from 5star Tuning, a FTE sponsor. Turns out it doesn't have the capability to tune my Ecoboost so I'll have to get a new tuner. It does make a difference, make me an offer, I'll mail it.

 

For sale:

'48-53 flathead block
0.040" over mains are 0.10" over
water jacket has been cleared of casting sand but hasnt been tanked since it was machined before i got it. Appears to have fairly low miles since the rebuild. Block is good for another 0.040" over or more with sleeves

The block is a solid block for a stock type build but isnt suitable for the build i want so im letting it go for $200

Most of the parts from my previous post (#2) are still available. There are also various stock flathead stuff i have kicking around (oil pumps, heads, intake, incomplete set of 0.040 pistons and rods (i dropped one so the rod became a column drop on another project) timing covers, pulleys, water pumps etc.

All parts are being taken to the swap meet in April so you guys get first crack

ill take pics of anything you want to see just shoot me a PM

 

Looking for firestone ride rite air bags for a 2003 super duty f250

 

For sale or trade. 1963 Mercury M100 longbox. excellent 292 3spd tranny very quick road gear and doesn't handle too bad. Interior great runs decent and only rust needing repair is cab corners very decent body. Open to offers or trades around 900 mark

 

on request for more pics

 

1948 Ford Pickup. Small parts missing. Motor seized. A little beat up but good project material. $1200. Loacted in central Saskatchewan. Can E-mail more pictures. Can store till spring.

 

A review of the posting rules:
•Only Ford truck related items and automotive tools & equipment can be listed.
•Only one picture is allowed per post, per item. If additonal pictures are necessary, place a link in your post to those pictures. Additional posted pictures will be removed without warning.
•You must have your private messaging (PM) turned on and be able to receive PM's to post an ad in the Chapter thread. If you do not, your post will be removed.
•Use the PM or email system to conduct all discussion and transactions regarding the item(s). You can post your interest in the item(s) and that you’ll contact the seller but no discussions. Keep it short.
•If you post an ad, please reply that you found, sold or otherwise disposed of the item.
•The buy/sell/trade thread will be purged periodically for old postings. Generally every 30 to 60 days.
•You need to be an active Chapter Member on FTE to post a wanted, for sale or for trade item(s). No Exceptions.
•You must have permission from the Chapter Leader or a Regional Moderator to post an ad in a chapter that you are not a member of.
•If you are new to FTE (less than 15 days) or have less than 25 posts, you must contact the Chapter Leader for permission before posting an ad.
•Your ad or reply to any ad is subject to editing or deletion at discretion of the Chapter Leader, Moderators or Administrators of FTE.
•Commercial advertisements are strictly prohibited.

 

Guy's: Looking for a defrost deflector for a 56

 

I have a friend who needs a drivers side one and I think he has 2 pass side pieces.Which do you need?I assume you are talking about the ports under the dash?
Thanks Dave

 

I'm looking for the one piece that goes on top of the dash. Thanks for the reply.

 

Just yanked a 360 fe with a warner T18 4 spd out of 1974 F-250. Doesn't run and the truck was last plated in 2006. $20 and its yours, otherwise its going to be eventually recycled.

 

I have a 6.9 with about 300 000 kms on it. I run 7.3 so if anyone needs it let me know. It ran and started fine just smokes like a bitch. Fuel though. So I threw injectors and lift pump on it and still smoked. Think it's the injection pump. I'm in Winnipeg.