Remove the little cover plate behind the interior door handle w/ small flatblade screwdriver.
Remove 2 screws behind the coverplate.
Remove armrest/window switch panel cover.Start from the front of armrest/switch panel and lift the cover off the armrest,then unplug window and doorlock switches.
Remove the screw from switch panel hole w/10mm socket.
Remove speaker grill,pry off with small flat blade screwdriver.
Remove 4 screws to the speaker,remove the speaker and unplug.
Remove the bottom 2 white plastic things the speaker screws attatch to.
Remove 2 screws at the bottom of the door panel.Lift door panel up and away from door while finagleing the interior doorhandle through the hole in the door panel.First you have to unsnap and push the handle in through the door panel,then when removing the doorpanel the handle has to go out through the panel.

Just a tip :I put a layer or 2 of masking tape on the tip of the screwdriver so I don't gouge or ding any plastic parts.

I've been unfortunate enough to remove my driverside door panel 4 times. 2 attempts at tinting my window,once installing my Mark LT doorhandles and once readjusting the wiring to the keypad on my doorhandle.