The first picture was taken at 5:15 and the last at 5:45 :30 total which included organizing the items, install and taking pictures; VERY EASY to install!! LOOKS AWESOME!!!!

Husky Wheel rear well liners, INSTRUCTIONS and hardware. Let your liners sit in the sun for a few min and they will bend a little easier. Not my idea, someone already suggested it I'm just passing the tip on...

Read and make it easy!! Not much to read actually...

Start with the PS (passenger side) as the positions A,B,C,D in the picture are in reference to the passenger side. If you start with the drivers side and look at the picture for reference it is backwards.

Note the A,B,C,D (FOR /AFT) is for the passenger side start there. Drivers side will be a snap if you do.

Before... no not studded tires...

Before #2

After...

AFTER!!!


All that is left over. The needle nose pliers were used to squeeze the clips that were installed on the truck to make sure they stayed in place and also used to expand the clips that were installed on the liner.