Thread: whitesdford and milehi_350... AE readings
View Single Post
Old Jan 16, 2013 | 10:01 PM
  #32  
Tugly's Avatar
Tugly
Hotshot
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jan 2011
Posts: 18,849
Likes: 179
From: Puget Sound
Originally Posted by milehi_350
I talked with an engineer at AE and after he looked at some of my data he said that the values looked right but for some reason the decimal point is in the wrong spot. He says he will look at it closer and get back to me.
That's one down. It makes sense. You can compensate by putting a multiplier of 10 in the configuration, and your FIPW will read normal. Just click the button with the three dots to the right of Fuel Injector Pulse Width on the parameter list and change the multiplier from one to 10.
 
Reply
0