Ford Truck Enthusiasts Forums

Ford Truck Enthusiasts Forums (https://www.ford-trucks.com/forums/index.php)
-   Engine Swaps (https://www.ford-trucks.com/forums/forum136/)
-   -   What engine do I have? (https://www.ford-trucks.com/forums/955865-what-engine-do-i-have.html)

GRAY WHISKERS 05-09-2010 09:30 PM

What engine do I have?
 
Greetings, Need a little help here. On top of block on the rear right side is stamped HEDJ3728. Can anyonr help me out with this. Also is there more numbers I should be looking for? Thanks Whiskers.

mud bros 05-09-2010 09:39 PM

wow that's going to be tough.

how about a picture then at least we can narrow it down to what engine family it belongs to.

what year model vehicle did you find it in?

GRAY WHISKERS 05-11-2010 10:29 AM

Went out and got some more casting numbers. Just above the starter D7TE A28 or A2B. 8 bolts on valve covers. Next to oil sending sencer is a circle with a C in it with a 8LT next to it.

I think I have 351Cleveland or 400 M Made in 1977 ofr a truck. What do you guys think? Thanks

85e150 05-11-2010 03:39 PM

351m or 400. Can't be a 351c as they were only produced '71 to '74.

Measure the stroke--4" = 400, 3.5" = 351M.

Moto Mel 05-16-2010 08:36 PM


Originally Posted by GRAY WHISKERS (Post 8875145)
Went out and got some more casting numbers. Just above the starter D7TE A28 or A2B. 8 bolts on valve covers. Next to oil sending sencer is a circle with a C in it with a 8LT next to it.

I think I have 351Cleveland or 400 M Made in 1977 ofr a truck. What do you guys think? Thanks

If it's a 351M there will be the letter M on the top front corner of the cylinder head, next to the valve cover.


All times are GMT -5. The time now is 10:40 AM.


© 2024 MH Sub I, LLC dba Internet Brands